====== 3.2 UniFi Controller Consolidated Change Log ====== ===== 3.2.10 ===== From 3.2.7->3.2.10 * UAPS - Fixed a case where wireless uplink stays isolated. * UAPS - Fixed roaming statistics. * UAPS - Fixed wireless uplink UAP LR stays isolated after a second wireless AP joins. * UAPS - Fixed waiting for firmware upgrade loop. * UAPs - Fixed a regression introduced in 3.2.7(fixing a crash) on rate limiting reported from forum. * UAPs - Fixed wireless uplink monitor randomly resets the interfaces causing disconnects. Note, Please setup a gatway ip address if using wireless uplink. If not using wireless uplink, please disable wireless uplink monitor. * UAPs - Fixed some memory leak in hostapd reported from forum. * UAPs - Default timezone to UTC. * UAPs - Fixed Guest Portal appends www.google.com to promotional URL if VLAN is enabled. This fix is needed along with v3.2.9 CTRL code or higher. * UAPs - Fixed rate limiting not working in certain configs, regression introduced in 3.2.7 reported from forum. * UAPs - Fixed radius accounting rounding account stop messages reported from forum. * UAPS - Fixed help text when using stamgr. * UAPS - Fixed hostname does not get updated sometimes. * UAPs(except AC) - Disable UAPSD by default. For Spectralink phone users, please change to enable in config.properties. * UAP Pro - Improved 5Ghz HT40 performance with Intel6300. * UAP Pro - Fixed ssh reboot along with toughswitch causes reboot loop. * UAP AC - Corrected power display again from previous fix. * UAP AC - Fixed AP can not pass PPPoE traffic reported from forum. * UAP AC - Fixed kernel panic during heavy reset testing. * UAP AC - Fixed Rogue AP reported as secured when it is open. * UAP AC - Fixed DHCP offers containinng wrong subnet mask reported from forum. * UAP AC - Added hostapd support for UAP ACS to help fix some WPA/2 Enterprise Radius issues reported from forum. * UAP AC - Fixed rebooting issue after some stress SSID testing. * UAP AC - Fixed STA Packet/byte counts is unreasonably low. * UAP AC - Fixed kernel panic in certain wireless environments. * UAP AC - Fixed sta reported info is not always accurate. * UAP AC - Fixed phantom SSID(ethx/wlxx) broadcast on the air reported from forum. * CTRL - Updated portal sample hotspot scripts to use tls v1 and ssl v1. * CTRL - Enable HT80 support in South Africa. * CTRL - Fixed web ui closes with error when downloading support info from chrome browser. * CTRL - Enable connectivity monitoring also for Zero Handoff. * CTRL - Fixed calendar selection is off at insight/past guest authorization reported from forum. * CTRL - Fixed map scaling issue with Firefox/Ubuntu. * CTRL - Fixed "Events" time scope filter is off. * CTRL - Fixed Guest Portal appends www.google.com to promotional URL if VLAN is enabled. This fix is needed along with v3.2.9 AP code or higher. * CTRL - Fixed Invalid Operator Account creation error in hotspot manager. * CTRL - Removed embargoed countries from country selection as well as removed Japan. * CTRL - Added some enhancement messages on roaming in logs. * CTRL - Clean up some api error messages. * CTRL - Fixed insight calendar off by a day. ===== 3.2.7 ===== From 3.2.5->3.2.7 * UAPs - Fixed changing wireless uplink AP channel causes download VAP to be stuck. * UAPs - Fixed failed to remove links between Wireless Uplink APs. * UAPs - Fixed Guest Portal intermittent failures reported from forum. * UAPs - Fixed rogue APs with PSK reported as open. * UAP - Fixed the failed fix for "Fixed random crash when rate limiting is enabled." reported from forum. * UAP Pro - Fixed panics on re-provisioning with ZH enabled/disable. * UAP Pro - Fixed throughput degradation after AP re-provision with clients that are 2x2 when the interface for 2Ghz is 3x3. * UAP AC - Corrected display of TX power. No TX power changes, only display fixes reported from forum. * CTRL - Fixed Insights/Past Connections only displays MAC addresses reported from forum. * CTRL - Fixed advanced adoption not working with IE11. * CTRL - UAP AC v2 will be forced to upgrade if versioning is 3.1.12 or earlier. * CTRL - Fixed country code list contains multiple set of countries. * CTRL - Fixed Poodle/SSLv3 vulnerability. * CTRL - Add Java 8 support. * CTRL - Add new feature to allow device update before adoption. * CTRL - Fixed upgrade will stop mFi controller from operation reported from forum. * CTRL - Wireless uplink only supports 4 APs. * CTRL - Fixed long AP alias name for wireless uplink will cause selection box to be not seen, reported from forum. ===== 3.2.5 ===== From 3.2.1->3.2.5 * CTRL - MAC installer fails to upgrade from v2 or v3 properly. * CTRL - MAC installer missing css. * CTRL - Fixed Linux Installer fails to upgrade with previous database. * CTRL - Disable allowing Zero Handoff on DFS channels. * CTRL - Fixed Events time filtering not working until other selections are made. * CTRL - Fixed External portal code delays when there are many APs. This is a fix in the sample external portal code. Not inside the Controller. * CTRL - Fixed UI slows when lots of maps with lots of AP. * CTRL - Fix MAC installer wiping out old database if previous version's controller is not closed. * CTRL - Remove PC/MAC wording in Linux installation. * CTRL - Fixed showing correct channel set for UAP Outdoor5 for US. * CTRL - Fixed guest voucher decimal places for multi-use. * CTRL - Fixed Portal Customization with non-ASCII SSID. * CTRL - Fixed multi-use vouchers are incremented twice per use. * CTRL - Fixed adding new site always default to US eventhough a different country was selected in the wizard. * CTRL - Corrected some wording to plural/singular. * CTRL - Fixed detail tab missing an expansion arrow. * CTRL - Updated portal paypal sample code. * CTRL - Linux Installer. Gracefully shutdown mongo db when shutting down controller.. * UAP/LR - Added counterfeit check.. * UAPs - Fixed Rate limiting/unlimiting with usergroups not working. * UAPs - Fixed Upgrade failure due to uplink monitor still running. * UAP - Fixed crash on out of memory when rate limiting is enabled. * UAPs(not AC) - Fixed Zero Handoff causes client to roam to wrong AP. * UAPs(not AC) - Fixed Wireless Uplink APs are not disabled properly when back to regular AP mode. * UAPs(not AC) - Fixed crash when detecting an AP transitioning from AP to isolated mode. * U5O - Updated correct channel list for European Countries. * UAP/LR - Fixed ping drops in noisy environments. * UAP/LR - Fixed random crash when rate limiting is enabled. * UAP/LR - Fixed crash after stress reboot test. * UAP-AC - Fixed GTK Key is not reset/set when interface up/down or connecting new STA. * UAP-AC - Fixed keys might not get installed properly for associating/disassociating STAs in 802.1x modes. * UAP-AC - Fixed 2Ghz radio stop sending beacon during heavy multicast stresss test. * UAP-AC - Fixed power output level for Australia country code. * UAP-AC - Added basic SNMP support. * UAP-AC - Fixed long ping delay to ethernet. * UAP-AC - Fixed Guest Portal allow devices to pass data to others before accepting TOS. * UAP-AC - Fixed AMPDU RX packet loss caused by response timeout. * UAP AC - Clean up STA events when STA is not associated. ===== 3.2.1 ===== From 3.1.13->3.2.1 * Installer - Fixed upgrade failure for MAC OS installation. * CTRL - Fixed Insight, Past Guest Authorization selecting calendar day adds a day. * CTRL - Fixed Insight, Past Guest Authorization front arrow skips a day. * CTRL - Fixed Insight, Past Guest Authorization back arrow does not work on the calendar. * CTRL - Fixed Guest Portal can not use Cyrillic for simple password. * CTRL - Fixed UTF-8 coding for guest portal voucher. * CTRL - Fixed a typo in unifi_sh_api for unauthorize guest. * CTRL - Fixed Rogue AP reports encrypted when AP is open security. * UAP Outdoor+ - Improvement to AP stuck to low rates.