====== 5.8 UniFi Controller Consolidated Change Log ====== ===== 5.8.29 ===== Controller bug fixes/changes since 5.8.28: * Allow choosing the department in the chat window. * Hide Fast Roaming feature for WEP networks. * Fix displaying IP address of gateway discovered by Discovery Tool. * Fix device buttons on Site Overview. * Fix a migration issue. * Fix a potential bug affecting autobackup on Windows 10. * Fix a bug which may cause unifi.yourdomain.com to be provisioned to devices for both the management and STUN URLs. * Don't exclude all port forwarded ports from policy routing. * Various bug fixes and improvements. ===== 5.8.28 ===== Controller bug fixes/changes since 5.8.27: * Various bug fixes and improvements. ===== 5.8.27 ===== Controller bug fixes/changes since 5.8.26: * Various bug fixes and improvements. ===== 5.8.26 ===== Controller bug fixes/changes since 5.8.25: * Remove TKIP only option from WPA security mode. * Fix bug that would reset USG port speed/duplex to defaults on controller upgrade. * Various bug fixes and improvements. ===== 5.8.25 ===== Controller bug fixes/changes since 5.8.24: * Add setup size status for UniFi Cloud Key. * Allow forced adoption in case the adopted device limit is reached. * Hide broken RSSI Histogram on nanoHD. * Fix autocomplete for creating new RADIUS user. * Various bug fixes and improvements. ===== 5.8.24 ===== Controller bugfixes/changes since 5.8.23: * Fix the management VLAN issue with AC-IW/IW-Pro. ===== 5.8.23 ===== Controller bug fixes/changes since 5.8.22: * Fix LED Brightness and Color options, this feature is available only for BaseStationXG. * Various backend bug fixes and improvements. ===== 5.8.22 ===== New Features: * Add BaseStationXG LED bar color control to the device properties panel. Controller bug fixes/changes since 5.8.21: * Enable RF scanning for UAP-nanoHD. * Fix a bug with AC-IW/IW-Pro provisioning which caused traffic to stop forwarding when the management VLAN and a WLAN VLAN are the same. * Various backend bug fixes and improvements. ===== 5.8.21 ===== Controller bug fixes/changes since 5.8.20: * Add validation for Promotional URL input in Guest Control. * Fix decoding UTF-8 characters over WebRTC connection. * Fix analytics graph display on firefox in Hotspot manager. * Fix default value for Outdoor Mode in batch AP configuration. * Fix property panel auto scroll after refresh. * Fix time range change after granularity modification on the Statistics Overview page. * Fix reversed TX/RX client statistics. * Update translations. ===== 5.8.20 ===== Controller bug fixes/changes since 5.8.19: * Use the same tab order as switches for UAP-AC-IW. * Update translations. * Device list: Invisible uplinks in Uplink column after refresh. * Switch stats should't allow to select device managed by other. * Remove extra PHY port for USG-XG. * Various backend bug fixes and improvements. ===== 5.8.19 ===== Controller bug fixes/changes since 5.8.17: * Adding display of RSTP in switch properties panel when it's enabled. * DPI refactor, also prevent more than 6 items on the list. * Fix timezone selection in Wizard. * Fix DPI Donut Chart on click handler. * Fix DNS rules for guest VLANs. * Fix restoring from autobackup on SD card. * Fix authorize.net support - the guest's email is now properly sent when that field is enabled. * Disable open terminal after click on IP address for sites without advanced features enabled. * Omit /0 networks from USG guest firewall group config as they are unsupported. * Hide Fast Roaming feature for Open networks. * Improve wireless uplink migration. * Statistics/Performance: fix time range selection. * Various backend bug fixes and improvements. ===== 5.8.17 ===== Controller bug fixes/changes since 5.8.16: * Add tooltip for enabling geoIP filtering. * Update translations. * Improve accuracy of reported wireless uplink candidates. * Various backend bug fixes and improvements. ===== 5.8.16 ===== Controller bug fixes/changes since 5.8.15: * Rename duplicated translation key for connectivity monitor. * Disable host record for static DHCP mappings. * Fix setting speed/duplex on disabled interfaces of USG-XG-8. * Temporarily limit MongoDB support to releases prior to 3.6.x (currently 3.4.14 is recommended). * Various backend bug fixes and improvements. ===== 5.8.15 ===== Controller bug fixes/changes since 5.8.14: * Extend Client statistics signal level range. * Update translations. * Fix unwanted username/password autocomplete. * Hide Elite ToS accept button for not supported countries in property panel. * Fix client signal binding. * Fix downloading autobackup via unifi.ubnt.com. * Fix editing WLANs via group config. * Fix filtering of top APs, and improve performance of stats filtering. * Fix available wireless uplinks so disabled radios/APs are not displayed. * Fix upgrade failed event when scheduled upgrade runs and device is on latest firmware. * Only enable source validation for single WAN use cases. * Various backend bug fixes and improvements. ===== 5.8.14 ===== New Features: * Local SSO login. Controller bug fixes/changes since 5.8.12: * Improve reported topology when using wireless uplinks. * Fix incorrect client signal value in ap's property panel and clients list. * Fix empty Radio Type dropdown on Performance page. * Fix a bug with L3 wireless adoption. * Display correct labels at ports list when port is not configurable. * Various backend bugfixes and improvements. ===== 5.8.12 ===== New Features: * Add app switcher. * Add speed and duplex config for USG interfaces. * Add WiFi Happiness to client STA statistics. * Allow users to opt-out wireless uplinking/meshing on per-radio basis. Controller bug fixes/changes since 5.8.10: * Add French translations. * Add timestamp to manually downloaded backup file. * Add tags column to devices page. * Add bypass for confirm before device downgrade. * Display user count graph in device performance statistics page. * Improve blocking opening device terminal for not supported devices. * Improve translation for firmware upgrade toast. * Fix Hotspot Manager and Site Overview with WebRTC connection. * Fix missing translation for Client Satisfaction in property panel. * Fix manually download backup file for Firefox. * Fix scrolling down the walls tab in map designer mode. * Fix incorrect internet traffic count for wireless clients. * Fix loading Settings page with German translations. * Fix saving network settings before adopting USG. * Fix IPv6 PD Prefix ID validation and config generation. * Topology path highlighting fix. * Hide configuration section in Elite Device settings when Cloud Access is off. * Prevent console errors when Map Links are toggled on and device is removed. * Additional columns in Clients list. * Show more accurate client's device images in property panel. * Show the WLAN VLAN is RADIUS assigned in the WLAN list, when it is. * Hide Elite ToS accept button for unsupported countries. * Mask password characters for RADIUS hotspot. * Update outdoor mode checkbox label. * Update translations. * Various backend bugfixes and improvements. ===== 5.8.10 ===== Controller bug fixes/changes since 5.8.9: * Add missing PoE event labels. * Fix broken device stats. * Various backend bugfixes and changes. ===== 5.8.9 ===== Controller bug fixes/changes since 5.8.8: * Update translations. * Improve reliability of topology. * Fix broken batch config for radios. * Fix channel width inconsistency. * Fix cut RF Scan tooltip. * Fix for clients counters in property panel. * Fix pre-selecting timezones. * Fix progress bar width on opening WebRTC connection. * Fix release notes display. * Fix IPv6 RA attributes. * Fix RADIUS auth and accounting on guest networks when using USG. * Fix port forward WAN interface. * Various backend bugfixes and improvements. ===== 5.8.8 ===== Controller bug fixes/changes since 5.8.7: * Add USG alias validation. * Add port group validation. * Add autochannel support for devices with multiple radios (XG). * Add ability to open debug terminal by clicking an IP on the device overview screen. * Display toast with information about new controller version. * Update timezones list to IANA tzdb. * Update translations. * Hide message when controller minor version has not changed. * Fix save/provision error with UnNP. * Fix IPv6 related configs. * Fix PPPoE interface name in routing table. * Fix an issue causing the controller to be factory reset. * Prevent overlapping header text over close button. * Prevent port forwards from interfering with IPsec and vice versa. * Various backend bugfixes and improvements. ===== 5.8.7 ===== Controller bug fixes/changes since 5.8.6: * Fix disabled 'Queue Changes' button in batch AP LED configuration. * Improve wireless adoption process. * Conditionally enable journalling on UCK after successful migration. * Various backend bugfixes and improvements. ===== 5.8.6 ===== New Features: * Assign USG Physical Ports to Logical Networks. Controller bug fixes/changes since 5.8.3: * Improve Neighboring Access Points loading. * Virtual Device on map: avoid duplicated device name inside label. * Show additional performance graphs in AP Property Panel. * Added missing mapping for PoE events (PoE Overload and PoE Disconnect). * Allow for assigning network groups that are only VLAN based. * Allow to dismiss toast when there are devices with upgrade available. * Fix saving DHCPv6 Server configuration. * Throughput graph - restore max values bars. * Topology on Safari - fix node labels position shifted up. * Virtual Device on map: avoid duplicated device name inside label. * Reduce port stats log level to fix unnecessary log spam. * PPPoE IPv6 provisioning improvements. * Improve guest portal handling on gateway devices. * Fix filtering virtual devices on maps. * Fix creation of IPv6 PD LAN networks. * Fix validation of IPv6 IPs as group members. * Various backend bugfixes and improvements. ===== 5.8.3 ===== New Features: * Add netconsole logging to site config. * Allow setting Management VLAN at Access Points. Controller bug fixes/changes since 5.8.2: * Tweak Topology lines shape to avoid overlapping with text labels. * Update translations. * Topology: show wireless Client's channel. * Display message when user logs into controller and there are devices with upgrade available. * Prepopulate RADIUS Tunnel-Medium Type once 'Virtual LANs (VLAN)' is selected. * Don't allow setting up DHCP server on IPv6 networks unless the interface type is `static`. * Clarify IPS alert wording. * Disable hardware offload on USG when Smart Queue QoS is enabled. * Add event for switch PoE port disconnect and overload. * Expose HTTPS blocking for Facebook Wi-Fi portal. Note you will need to add all required Facebook subnets/hostnames to pre-authorization list manually. * Allow Facebook Wi-Fi portal to be opened in Apple Captive Network Assistant. * Prevent site-to-site VPN from unnecessarily reprovisioning on controller start. * Fix State in map marker label is on the left side. * Fix Topology error occuring for aliases longer than 24chars. * Fix Invisible STA device image. * Fix DPI Selector per user: all categories highlighted. * Fix Topology path highlighting when mouse pointer is over client label. * Fix User DPI details sometimes application name is empty. * Select RADIUS VLAN when enabled for WLAN. * Fix Debugging Metrics. * Fix Topology console error. * Fix factory reset issue on UCK. * Fix pre-adoption upgrade of USG devices. * Fix VPN status reporting. * Lower RSSI requirements for wireless adoption. * Remove reboot before upgrade logic from UAP upgrades. * Various backend bugfixes and improvements. ===== 5.8.2 ===== New Features: * Property Panel: Show images of most popular client devices. * Added support for USC8 switch. Controller bugfixes/changes since 5.8.1: * Allow to customize Map Device Marker label. * Change SSH Credentials before restore from backup in wizard. * Modify the way how Channel Distribution widget lays out its internal elements. * Update translations. * Disabled devices should not be taken into account in general site status. * Designer Map: fix setting scale in feet. * Fix airTime scan Details empty table. * Fix case when locked device could be moved on Designer map. * Fix UI jitter bug in Device Property Panel airTime accordion. * Topology: prevent overlapping labels on wireless links. * Fix date format not always being localized. * MeshV3 Stability Improvements. * Fix a bug preventing email password recovery from functioning in some cases. * Various hardware provisioning improvements. * Various backend bugfixes and improvements. ===== 5.8.1 ===== New Features * Add WeChat authentication to Hotspot. * Add Elite Device service. * Allow setting opacity on Image-type maps. * New Channel Distribution widget. Controller bugfixes/changes since 5.8.0: * Add control for dnsmasq as DHCP server. * Allow setting mask /31 (255.255.255.254) for USG/WAN to be compliance with RFC3021. * Display warning when time series start day is before data retention settings for given granularity. * Improve device marker on maps. * Update status colors in VPN widget. * Update translations. * WAN & WLAN Histograms - mark current values instead of mean ones, limit glowing elements number to 3. * Add message with instruction to csv upload. * Add model EOL (end of life) pending warning. * Additional charts for Devices (Statistics -> Performance view). * Drag and drop optimizations. * Expand firewall group name limit to 64. * Hide the Aggregation option under Network when UAP supports it natively. * Improve way how Donut charts display tooltips, to prevent being overlapped by other elements. * IPv6 - Add DHCPv6 DNS Control. * Lock web store to US only. * Fix handling error responses received via WebRTC channel. * Fix Routing Utilisation Widget layout issues. * Fix Schedule Upgrade editing via WebRTC. * Fix displaying selected priority wireless uplink. * Fix displaying blank page on double click on Insights. * Fix filtering outdoor channels by using default value for outdoor mode. * Fix handling error responses received via WebRTC channel. * Fix missing action buttons after enabling cloud access. * Fix saving RADIUS profile without accounting servers. * Fix MAC auth provisioning so RADIUS assigned VLAN is set when it's enabled in the RADIUS profile. * Fix radios sorting in Configure Radios section. * Update device uplink name dynamically. * GeoIP Filtering - Block incoming/outgoing/both traffic. * Temporarily remove WAN/WAN2 IPv6 PPPoE option. * Rename label Select group to Any in firewall's form. * SNMPv3 - Username and Password validation to match SNMPv3 standard and USG requirements. * Show Hardware Offload as off when IPS is enabled, don't allow it to be turned on. * Map fixes: Devices disappearing from map when changing from legacy to designer without saving and cannot change map type from Google to image at the second time. * Several device management improvements, to improve UX and mitigate some errors. * Various backend bugfixes and improvements. ===== 5.8.0 ===== New Features * Add Scheduled Upgrades support (Beta). * Add site VPN route distance. Controller bugfixes/changes since 5.7.9: * Additional DPI application icons (i.e. Slack). * Add description for mDN. * Add tooltip that DHCP DNS must be a valid IP address only. * Hide gateway, broadcast and mask for User VPN networks. * In case of Topology with large number of nodes (> 200), draw straight lines to improve performance. * Improve way how Donut charts display tooltips, to prevent being overlapped by other elements. * Showing message about missing permission in routing utilization widget. * Extend form's elements to show whole value at Settings/User Groups. * Additional charts for Devices (Statistics -> Performance view). * Fix missing DPI users (name & icon). * Fix for airTime view in Firefox 57. * Add workaround for Cloud Key firmware upgrade issue, for devices on firmware 0.8.1 to 0.8.4. * Apply the same rules for both TCP and UDP DNS, which fixes the issue * Various backend bugfixes and improvements.