=====UniFi AP AC Lite=====
{{:products:uap-ac-lite:uap-ac-lr-front-2x.png?200|}}\\
Models made before September 2016 (datecode 1638) lack 802.3af PoE, this is only indicated with a sticker on the packaging! Models before this require 24v PoE via injector or 24v Ubiquiti switch port.
**Series Type:** UniFi\\
**Website Link:** [[https://www.ubnt.com/unifi/unifi-ap-ac-lite/|AP AC Lite]]\\
**Model:** UAP‑AC‑LITE\\
**Type:** 802.11ac Dual Radio Access Point\\
**Description:** //The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high‑performance wireless networks.//\\
===== Specifications =====
^ UAP-AC-LITE ^ ^
| Dimensions | 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24") |
| Weight | 170 g (6.0 oz) |
| With Mounting Kits | 185 g (6.5 oz) |
| Networking Interface | (1) 10/100/1000 Ethernet Port |
| Buttons | Reset |
| Power Method - Option 1 | 802.3af/A PoE |
| Power Method - Option 2 | 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter (* Only the single-pack of the UAP-AC-LITE includes a PoE adapter.) |
| Power Save | Supported |
| Maximum Power Consumption | 6.5W |
| **Maximum TX Power** | |
| 2.4 GHz | 20 dBm |
| 5 GHz | 20 dBm |
| Antennas | (2) Dual-Band Antennas, 3 dBi Each |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| BSSID | Up to 8 per Radio |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
\\
^ Hardware ^ ^
| Instruction set | MIPS |
| Vendor | Qualcomm / Atheros |
| Bootloader | UBoot |
| System-On-Chip | QCA9563-AL3A |
| CPU Frq | 775 MHz |
| BogoMIPS | 385.84 |
| Flash-Chip | Macronix MX25L12835FMI |
| Flash size | 16 MiB |
| RAM-Chip | Winbond W971GG6KB-25 |
| RAM size | 128 MiB |
| Wireless 1 (2.4 GHz) | QCA9563 built-in |
| Wireless 2 (5 GHz) | Ubiquiti U-AME-G1-BR4A (custom QCA988X) |
| Eth Phy | Atheros AR8033-AL1A |
| USB | possibly unpopulated |
| Serial | Yes, for U-Boot |
\\
^ Advanced Traffic Management ^ ^
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest Traffic Isolation | Supported |
| WMM | Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
\\
^ Supported Data Rates (Mbps) ^ ^
| **Standard** | **Data Rates** |
| 802.11ac | 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11n | 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
===== LED Status Light Ring =====
- **Blue Ring - Solid**
- Normal Operation
- **White Ring - Flashing**
- Unconfigured state
===== Troubleshooting tips =====
- **No light/power**
- Check ethernet connection.
- Are you connected to a PoE enabled switch or PoE injector?
- Does the switch/injector have power?
- **Can only connect to the primary/default VLAN**
- Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled')
===== FAQ =====
{{page>apfaq&nofooter}}
* **Does this AP come with a PoE injector for use on a non-PoE enabled switch?**
* Yes!
//NOTE: The 5pack version of this AP does NOT come with PoE injector, it is recommended to use them with a PoE enabled switch like the [[products:unifi:unifi_switch_8-150w|UniFi Switch 8-150W]] or better.//
===== Resources =====
[[https://www.ubnt.com/downloads/datasheets/unifi/UniFi_AC_APs_DS.pdf|Datasheet]]\\
[[https://dl.ubnt.com/guides/UniFi/UniFi_AP-AC-Lite_QSG.pdf|Quickstart Guide]]\\
{{page>hardwarenavbox&nofooter}}