=====UniFi AP SHD=====

{{:products:uap-ac-shd:uap-ac-shd_front-2x.png?200}}\\

**Series Type:** UniFi\\
**Website Link:** [[https://unifi-shd.ubnt.com/|AP SHD]]\\
**Model:** UAP-AC-SHD\\
**Type:** 802.11AC Wave 2 Access Point with Dedicated Security Radio\\

**Description:** //Deploy the UniFi SHD AP in high-density environments
requiring maximum wireless performance. The UniFi SHD
AP features simultaneous, dual-band, 4x4 MU-MIMO
technology and convenient 802.3at PoE+ compatibility.//\\

===== Specifications =====

^ UAP‑AC‑HD                  ^                                                                                  ^
| Dimensions                 | 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89")                                        |
| Weight                     | 700 g (1.54 lb)                                                                  |
| With Mounting Kits         | 830 g (1.83 lb)                                                                  |
| Networking Interface       | (2) 10/100/1000 Ethernet Ports                                                   |
| Buttons                    | Reset                                                                            |
| Power Method               | 802.3at PoE+                                                                     |
| Supported Voltage Range    | 44 to 57VDC                                                                      |
| Power Supply               | UniFi Switch (PoE)                                                               |
| Power Save                 | Supported                                                                        |
| Maximum Power Consumption  | 20W                                                                              |
| **Maximum TX Power**       |                                                                                  |
| 2.4 GHz                    | 6-25 dBm                                                                         |
| 5 GHz                      | 6-25 dBm                                                                         |
| Antennas                   | (2) Dual-Port, Dual-Polarity Antennas, , 2.4 GHz: 6 dBi each, 5 GHz: 6 dBi each  |
| Wi-Fi Standards            | 802.11 a/b/g/n/ac/ac-wave2                                                       |
| Wireless Security          | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) 802.11w/PMF                    |
| BSSID                      | Up to 8 per Radio                                                                |
| Mounting                   | Wall/Ceiling (Kits Included)                                                     |
| Operating Temperature      | -10 to 70° C (14 to 158° F)                                                      |
| Operating Humidity         | 5 to 95% Noncondensing                                                           |
| Certifications             | CE, FCC, IC                                                                      |
\\
^ Hardware                     ^                                          ^
| Instruction set              | MIPS                                     |
| Vendor                       | Qualcomm / Atheros                       |
| Bootloader                   | ?                                        |
| System-On-Chip               | IPQ8064                                  |
| CPU Frq                      | ?                                        |
| BogoMIPS                     | 2517.81                                  |
| Flash-Chip                   | ?                                        |
| Flash size                   | ?                                        |
| RAM-Chip                     | Winbond W632GU6KB-12                     |
| RAM size                     | 256 MiB                                  |
| Wireless 1 (2.4 GHz)         | QCA9994                                  |
| Wireless 2 (5 GHz)           | QCA9994                                  |
| Wireless 3 (2.4 GHz / 5 GHz) | QCA9889                                  |
| Bluetooth (2.4GHz)           | CSR8811                                  |
| Eth Phy                      | AR8033-AL1A                              |
| USB                          | 3.0 (Type-C)                             |
| Serial                       | ?                                        |
\\
^ Advanced Traffic Management  ^                                            ^
| VLAN                         | 802.1Q                                     |
| Advanced QoS                 | Per-User Rate Limiting                     |
| Guest Traffic Isolation      | Supported                                  |
| WMM                          | Voice, Video, Best Effort, and Background  |
| Concurrent Clients           | 1000+                                      |
\\
^ Supported Data Rates (Mbps)  ^                                                              ^
| **Standard**                 | **Data Rates**                                               |
| 802.11ac                     | 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)  |
| 802.11n                      | 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)                |
| 802.11a                      | 6, 9, 12, 18, 24, 36, 48, 54 Mbps                            |
| 802.11g                      | 6, 9, 12, 18, 24, 36, 48, 54 Mbps                            |
| 802.11b                      | 1, 2, 5.5, 11 Mbps                                           |
===== LED Status Light Ring =====

    - **Blue Ring - Solid**
      - Normal Operation 
    - **White Ring - Flashing**
      - Unconfigured state

===== Troubleshooting tips =====

  - **No light/power**
    - Check ethernet connection.
    - Are you connected to a PoE enabled switch or PoE injector?
    - Does the switch/injector have power?
  - **Can only connect to the primary/default VLAN**
      - Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled')


===== FAQ =====

{{page>apfaq&nofooter}}
  * **Does this AP come with a PoE injector for use on a non-PoE enabled switch?**
    * No, it is recommended to use them with a PoE enabled switch like the [[products:unifi:unifi_switch_8-150w|UniFi Switch 8-150W]] or better.


===== Resources =====

<WRAP download>
[[https://www.ubnt.com/downloads/datasheets/unifi/UniFi_UAP-AC-SHD_DS.pdf|Datasheet]]\\

[[https://dl.ubnt.com/guides/UniFi/UAP-AC-SHD_QSG.pdf|Quickstart Guide]]\\

</WRAP>

{{page>hardwarenavbox&nofooter}}