=====UniFi Mesh Pro===== {{:products:uap-ac-m-pro:uap-ac-m-pro-front-2x.png?200|}}\\ **Series Type:** UniFi Mesh\\ **Website Link:** [[https://unifi-mesh.ubnt.com|AC Mesh]]\\ **Model:** UAP-AC-M-PRO\\ **Type:** 802.11AC Indoor/Outdoor Wi-Fi Access Points with Plug & Play Mesh Technology\\ **Description:** //The UAP-AC-M-PRO provides simultaneous, dual-band, 3x3 MIMO technology//\\ ===== Specifications ===== //Update specs for Mesh// ^ UAP-AC-M-PRO ^ ^ | Dimensions | 343.2 x 181.2 x 60.2 mm (13.51 x 7.13 x 2.37") | | Weight | 633 g (1.40 lb) | | Networking Interface | (2) 10/100/1000 Ethernet Port | | Buttons | Reset | | Power Method | 802.3af/A PoE | | Power Supply | 48V, 0.5A Gigabit PoE Adapter (* Only the single-pack of the UAP-AC-LITE includes a PoE adapter.) | | Power Save | Supported | | Maximum Power Consumption | 9W | | **Maximum TX Power** | | | 2.4 GHz | 22 dBm | | 5 GHz | 22 dBm | | Antennas | (3) Dual-Band Antennas, 8 dBi Each | | Wi-Fi Standards | 802.11 a/b/g/n/ac | | Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) | | BSSID | Up to 8 per Radio | | Mounting | Wall/Pole (Kits Included) | | Operating Temperature | -40 to 70° C (-40 to 158° F) | | Operating Humidity | 5 to 95% Noncondensing | | Certifications | CE, FCC, IC | \\ ^ Hardware ^ ^ | Instruction set | MIPS | | Vendor | Qualcomm / Atheros | | Bootloader | UBoot | | System-On-Chip | QCA9563-AL3A | | CPU Frq | 775 MHz | | BogoMIPS | 385.84 | | Flash-Chip | Macronix MX25L12835FMI | | Flash size | 16 MiB | | RAM-Chip | Winbond W971GG6KB-25 | | RAM size | 128 MiB | | Wireless 1 (2.4 GHz) | QCA9563 built-in | | Wireless 2 (5 GHz) | Ubiquiti U-AME-G1-BR4A (custom QCA988X) | | Eth Phy | Atheros AR8033-AL1A | | USB | possibly unpopulated | | Serial | Yes, for U-Boot | \\ ^ Advanced Traffic Management ^ ^ | VLAN | 802.1Q | | Advanced QoS | Per-User Rate Limiting | | Guest Traffic Isolation | Supported | | WMM | Voice, Video, Best Effort, and Background | | Concurrent Clients | 250+ | \\ ^ Supported Data Rates (Mbps) ^ ^ | **Standard** | **Data Rates** | | 802.11ac | 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) | | 802.11n | 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) | | 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | | 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps | | 802.11b | 1, 2, 5.5, 11 Mbps | ===== LED Status Light Ring ===== - **Blue Ring - Solid** - Normal Operation - **White Ring - Flashing** - Unconfigured state ===== Troubleshooting tips ===== - **No light/power** - Check ethernet connection. - Are you connected to a PoE enabled switch or PoE injector? - Does the switch/injector have power? - **Can only connect to the primary/default VLAN** - Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled') ===== FAQ ===== {{page>apfaq&nofooter}} * **Does this AP come with a PoE injector for use on a non-PoE enabled switch?** * ?? ===== Resources ===== [[https://www.ubnt.com/downloads/datasheets/unifi/UniFi_AC_Mesh_DS.pdf|Datasheet]]\\ [[http://dl-origin.ubnt.com/guides/UniFi/UniFi_AP-AC-M-PRO_QSG.pdf|Quickstart Guide]]\\ {{page>hardwarenavbox&nofooter}}