===== UniFi Switch Flex ===== {{https://cdn.shopify.com/s/files/1/1439/1668/products/USW-Flex_Front_Angle_1024x1024.png?direct&200}}\\ **Series Type:** Unifi \\ **Website Link:** [[https://www.ui.com/unifi-switching/unifi-switch-flex/|UniFi Switch Flex]]\\ **Model:** USW-FLEX\\ **Type:** managed, Layer 2 Gigabit switch\\ **Description:** The UniFi® Switch Flex is an Indoor/Outdoor managed, Layer 2 Gigabit switch with auto-sensing 802.3af PoE support.////\\ ===== Features ===== * Weatherproof housing * 5 Gigabit RJ45 Ports * 1 PoE In * 4 802.3af PoE Out ===== Specifications ===== ^ USW-FLEX | | | Dimensions | 122.5 x 107.1 x 28.0 mm (4.82 x 4.22 x 1.10") | | Weight | 230 g (8.11 oz) | | Enclosure Characteristics | | | Total Non-Blocking Throughput | 5 Gbps | | Switching Capacity | 10 Gbps | | Max. Power Consumption | 5W (Excluding PoE Output) | | Max. Passive PoE Wattage per Port | 15.4W | | Total PoE Power Budget \\ - Powered by AF mode PSE \\ - Powered by AT mode PSE \\ - Powered by BT mode PSE \\ - Powered by PoE Adapter \\ (Enabled in Controller) | \\ 8W \\ 20W \\ 46W \\ 46W | | Power Method \\ - PoE Mode 1 \\ - PoE Mode 2 \\ - PoE Mode 3 | \\ 802.3af/at (Pins 1, 2+; 3, 6-)1 \\ 802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-)2 \\ 50V/60W PoE Adapter3 | | Supported Voltage Range \\ - 802.3af \\ - 802.3at/bt | \\ 44 - 57V \\ 50 - 57VV | | | LEDs | PoE; Link/Speed/Activity | | | System LED | Status | | | Networking Interfaces | (5) 10/100/1000 Mbps RJ45 Ports | | PoE Out (Ports 2-5) | 802.3af (Pins 1, 2+; 3, 6-) | | | Management Interface | Ethernet In-Band Management | | ESD/EMP Protection | ± 16kV Air, ± 16kV Contact | | Operating Temperature \\ - 46W PoE Output \\ - 25W PoE Output | \\ -40 to 55° C (-40 to 131° F) \\ -40 to 65° C (-40 to 149° F) | | Operating Humidity | 5 to 95% Noncondensing | | Certifications | CE, FCC, IC | ===== Resources ===== [[https://dl.ubnt.com/datasheets/unifi/USW-Flex_DS.pdf|Datasheet]]\\ [[https://dl.ubnt.com/qsg/usw-flex.pdf|Quickstart Guide]]\\ {{page>hardwarenavbox&nofooter}}