4.6 UniFi Controller Consolidated Change Log

New Features: UniFi Controller

• UniFi Switch port duplex/speed are now configurable.
• Added 2G/5G toggle to map coverage view.
• Added Copy Config option in switch dialog.

UniFi Controller + UniFi Security Gateway

• Added Insights page for Remote User VPN.
• Added Dynamic DNS configuration and Insights page.

Feature Change:

• UniFi Controller
• DHCP Guarding can be configured separately now and is defaulted to disabled.

changes since 4.6.3 to 4.6.6 UniFi Controller

• Add auto phone firmware upgrade option (per-site settings).
• Support DEBUG level syslog logging.
• Check (and optionally cache) phones app upgrades from CDN.
• Add check button in Settings-Controller for checking UVP upgrades from CDN.
• OUI table updated.
• Verified admin can no longer be re-invited.
• When an existing admin is invited to a new site, no password update is required.
• Fixed issue with revoked admins maintaining partial access in existing logged in session.
• When updating admin's email, change is rejected if that email is pending verification.
• Insight/Switch-Stats Overview, POE column is now un-sortable.
• Fixed unable to set SFP/SFP+ ports to aggregate.
• User/guest filter in client view now works when browser language is Simplified Chinese.
• Controller no longer ignores PtP/Virtual Interfaces. This resolves incorrect upgrade url/guest redirection url when devices are contacting controller with those network interfaces.
• Language selection is removed for now. The controller detects browser language automatically.
• CSRF token will now be invalidated properly on logout.
• Relax device username restriction to ^[_A-Za-z0-9][-\@_.A-Za-z0-9]*$.
• Login name with '@' symbol is now considered as invalid.
• Fixed a UI bug that causes switching to different site to get stuck.
• When deleting a site, verifications (pending admins) of the site will also be invalidated now.
• Improve error handling on handling lingering objects.
• Controller will no longer send rate update to AP/USG when there’s no UserGroup defined and Guest Portal is disabled, so the devices will not get stuck in a re-provision loop.
• Fixed DHCP Pool IP validation so it does not reject x.x.x.0 ipv4 addresses.
• Fixed incorrect description on wlan overrides in AP dialog.
• Fixed VLAN ID overrides.
• Eliminated duplicate Rogue DHCP events/alerts.
• Cancel button within a dialog will now go back to previous view instead of closing the entire dialog window.
• Fixed quota limitation in hotspot portal.
• Fixed 'VLAN cannot be empty' error on modifying WLAN overrides.
• Per-extension voicemail option is properly provisioned to phones now.
• Replace misleading placeholder with correct one in Settings-Guest Policy-Portal URL Hostname.
• Fixed another UI bug that causes switching to different site to get stuck.
• Add HT40/80 support for Costa Rica.
• UI view is now reflecting to admin role properly after switching sites.
• Rogue DHCP alert is non-repeating now.
• Restricted/Allow subnets settings will no longer cause USG provisioning loop.
• Double quotes in port forwarding description will no longer cause USG provisioning loop.
• Client history is now migrated correctly from v3 backup/installation..
• Fixed Paypal hotspot payment gateway.
• Added system.properties inline documentation on guest portal redirector ports.
• Fixed incorrect max PHY rate used in User Group rate limiting on UAP-AC and UAP-AC-Outdoor.
• Fixed a UI bug that incorrect mark switch port as aggregating member port.
• User can no longer restore a controller that has another restoration in-progress.
• Removed a VOIP related UI element that is only for debugging.
• Fixed a missing hint text in Change My Password dialog.
• Fixed a UI bug that prevents users from unsetting extension's email.
• Fixed device state validation on deleting device. User will now receive proper error message if the device is not eligible for deletion.
• Fixed a bug where an admin cannot update its profile when another pending invitation of the same email exists.
• Added systemd service unit config to Debian/Ubuntu packages.
• Added binutils to Debian/Ubuntu package dependencies.
• When a wireless network is configured with schedule enabled and all days are unchecked, the CTLR/AP will respect the config. As a result, the wireless network will be provisioned but will be disabled by AP scheduler.
• Workaround for device counts in Dashboard and Device view by adding self-recovery code. We're still working to identify the root cause. Report here, here and here.
• Improved database migration code to resolve invalid id error in wlan_overrides.
• Payment amount field in authorization (Insights and Hotspot view) are now rendered correctly for all currencies.
• When user moves a phone to another site, the phone name was reset to mac address.
• Updated help text when moving a device to another site.
• Prevented invalid inputs in Hotspot view for Operator and Voucher operations.
• Devices can no longer get placed on a deleted map.
• Updated error message for Wireless Network WEP Key.
• Read-only admins can no longer see USG PPPoE password.
• WLAN override PSK is now rendered properly.
• USG LLDP is now disabled on WAN port.
• Moving switch to another site will also update topology information (uplink/downlinks).
• Added advanced adoption capability in Switch/Gateway dialogs.
• Fixed stylesheet in user verify page.
• Updated VoIP Provider/Extension Settings:
• External Provider, IP-Based
• Added default Outbound Proxy option (provider).
• Added Outbound Proxy and Voicemail options (extension).
• External Provider, User-Based
• Added Authorization ID option (extension).
• Manual Provider
• Removed Voicemail option (provider).
• Authorization ID, SIP Proxy and SIP voicemail are now correctly provisioned to phones based on provider type.
• Fixed a UI bug in Provider form.

UniFi Security Gateway

• Fixed firewall rules for external guest portal.
• Fixed an offloading module bug that causes USG restart.

UniFi Switch

• No longer reports client IP address in reversed order.
• Improve uplink port detection.

UniFi AP

• Fixed disabled legacy (802.11b) support on UAP-AC/UAP-AC-Outdoor.
• Fixed slow throughput when UAPSD (WMM-PS) is enabled on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series.
• Fixed missing Radius Accounting attributes on UAP-AC/UAP-AC-Outdoor.
• WLAN scheduler no longer depends on uplink connectivity monitor.
• Improve IGMP snooping on UAP-AC/UAP-AC-Outdoor.
• Fixed stamgr output on UAP-AC/UAP-AC-Outdoor.
• Improve wireless connection stability with certain mobile devices on UAP-AC/UAP-AC-Outdoor.
• Add HT40/80 support for Costa Rica on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series.
• UAP-ACv1 2.4GHz now correctly advertise b/g/n mode support.
• UAP-AC/UAP-AC-Outdoor no longer report invalid RSSI values.
• Improve the device/controller connection reliability on all models.
• Fixed a multicast forwarding bug on UAP-AC and UAP-AC-Outdoor.
• Fixed connection problem with PS4/XboxOne with 3.2.11 AP firmware on UAP-AC and UAP-AC-Outdoor.

Changes in 4.6.5

• UniFi Controller
• Fixed quota limitation in hotspot portal.
• Fixed 'VLAN cannot be empty' error on modifying WLAN overrides.
• Per-extension voicemail option is properly provisioned to phones now.
• Replace misleading placeholder with correct one in Settings-Guest Policy-Portal URL Hostname.
• Fixed another UI bug that causes switching to different site to get stuck.
• Add HT40/80 support for Costa Rica.
• UI view is now reflecting to admin role properly after switching sites.
• Rogue DHCP alert is non-repeating now.
• Restricted/Allow subnets settings will no longer cause USG provisioning loop.
• Double quotes in port forwarding description will no longer cause USG provisioning loop.
• Client history is now migrated correctly from v3 backup/installation..

UniFi Security Gateway

• Fixed a bug in 4.2.7 firmware that disables offload module unintentionally.

UniFi Controller

• Add auto phone firmware upgrade option (per-site settings).
• Support DEBUG level syslog logging.
• Check (and optionally cache) phones app upgrades from CDN.
• Add check button in Settings-Controller for checking UVP upgrades from CDN.
• OUI table updated.
• Verified admin can no longer be re-invited.
• When an existing admin is invited to a new site, no password update is required.
• Fixed issue with revoked admins maintaining partial access in existing logged in session.
• When updating admin's email, change is rejected if that email is pending verification.
• Insight/Switch-Stats Overview, POE column is now un-sortable.
• Fixed unable to set SFP/SFP+ ports to aggregate.
• User/guest filter in client view now works when browser language is Simplified Chinese.
• Controller no longer ignores PtP/Virtual Interfaces. This resolves incorrect upgrade url/guest redirection url when devices are contacting -controller with those network interfaces.
• Language selection is removed for now. The controller detects browser language automatically.
• CSRF token will now be invalidated properly on logout.
• Relax device username restriction to ^[_A-Za-z0-9][-\@_.A-Za-z0-9]*$.
• Login name with '@' symbol is now considered as invalid.
• Fixed a UI bug that causes switching to different site to get stuck.
• When deleting a site, verifications (pending admins) of the site will also be invalidated now.
• Improve error handling on handling lingering objects.
• Controller will no longer send rate update to AP/USG when there’s no UserGroup defined and Guest Portal is disabled, so the devices will not get stuck in a re-provision loop.
• Fixed DHCP Pool IP validation so it does not reject x.x.x.0 ipv4 addresses.
• Fixed incorrect description on wlan overrides in AP dialog.
• Fixed VLAN ID overrides.
• Eliminated duplicate Rogue DHCP events/alerts.
• Cancel button within a dialog will now go back to previous view instead of closing the entire dialog window.

UniFi Security Gateway

• Fixed firewall rules for external guest portal.

UniFi Switch

• No longer reports client IP address in reversed order.
• Improve uplink port detection.

UniFi AP

• Fixed disabled legacy (802.11b) support on UAP-AC/UAP-AC-Outdoor.
• Fixed slow throughput when UAPSD (WMM-PS) is enabled on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series.
• Fixed missing Radius Accounting attributes on UAP-AC/UAP-AC-Outdoor.
• WLAN scheduler no longer depends on uplink connectivity monitor.
• Improve IGMP snooping on UAP-AC/UAP-AC-Outdoor.
• Fixed stamgr output on UAP-AC/UAP-AC-Outdoor.
• Improve wireless connection stability with certain mobile devices on UAP-AC/UAP-AC-Outdoor.
• Add HT40/80 support for Costa Rica on UAP, UAP-LR, UAP-Pro and UAP-Outdoor series.
• UAP-ACv1 2.4GHz now correctly advertise b/g/n mode support.
• UAP-AC/UAP-AC-Outdoor no longer report invalid RSSI values.
• Improve the device/controller connection reliability on all models.

Feature Add:

• CTRL - Add support to create an option to allow remote user VPN access to site to site VPN.
• CTRL - Add Outbound proxy and authentication ID fields in VOIP selections.
• CTRL - Add prefetch of UVP platform image into local storage.
• CTRL - Add SIP from User field for some SIP providers in IP base.
• CTRL - Add support to put any device into map.
• CTRL - Add configurable voicemail Url for UVP reported by forum.
• CTRL - Add multiple accounting server support for 802.1x/WPA2 Enterprise.
• CTRL - Add multiple radius server support for 802.1x/WPA2 Enterprise.
• CTRL - Add UI support for enable/disable UAPSD. It is default disabled.
• UVP App - Add outbound proxy option support.
• UVP App - Add multi-sip account support.
• UVP App - Add support to launch 3rd party app as handset is lifted.
• UVP Exec - Add support for USB speaker.
• UAP - Add configurable management rates via config.properties.
• UAP - Add configurable broadcast/multicast rates via config.properties.

Change List:

• CTRL - version change from v4.6.0 to v4.6.3
• CTRL - Fixed USW config edit always append to end of dialog instead of replace.
• CTRL - Fixed a read only admin can not verify himself and causes a loop.
• CTRL - Changed naming from Network Groups to Management VLAN.
• CTRL - Handle setting USW aggregated ports properly if they are already aggregated.
• CTRL - Fixed invalid payload error when creating aggregation with last port reported by forum.
• CTRL - Fixed frameable response(clickjacking).
• CTRL - Fixed missing events for clients.
• CTRL - Fixed port forwarding range settings reported by forum.
• CTRL - Fixed a bunch of map related issues.
• CTRL - Add missing event calls for admins.
• CTRL - Fixed controller crashing after setting net to 10.0.0.1/8 reported by forum.
• CTRL - Fixed random firefox crashes.
• CTRL - Increase load balance limit from 30 to 128.
• CTRL - Fixed insights block client is not working.
• CTRL - Add date and time for last executed speed test.
• CTRL - Fixed dashboard showing LAN up and down as 0.
• CTRL - mDNS doesn't work across subnets.
• CTRL - Fixed speed test "Close" mouse click hin is persistent.
• CTRL - Move the show properties icon to not overlap the scroll arrow.
• CTRL - Add config.properties file when doing backup.
• CTRL - Fixed recursive URL in hotspot.
• CTRL - Added a button to launch a login page for hotspot operators.
• CTRL - Fixed Guest filter not working in hotspot manager.
• CTRL - Fixed UVP can not be detected by controller on non default ports reported by forum.
• CTRL - USW port selection in panel will bring to selected port.
• CTRL - Add last port to wired cliends in insights.
• CTRL - Fixed AP TX power gets set back to Auto.
• CTRL - Fixed controller memory leaks.
• CTRL - Fixed events/insights always get set to last page.
• CTRL - Change insights 1 year to All.
• CTRL - Trouble renaming APs reported by forum.
• CTRL - Guest in Events are greyed out even if connected.
• CTRL - Fixed events filter page number is off depending on the filter setup.
• CTRL - Fixed WLAN groups can get messed up during updates.
• CTRL - Fixed recent activities charts gets blanked until next refresh.
• CTRL - Show disable in AP dialog if WLAN is disabled.
• CTRL - Allow 72 entries for allow subnets reported by forum.
• CTRL - Refresh resets USW scrolling views.
• CTRL - Fixed forget password having two back buttons.
• CTRL - Fixed speed test progress bar is backwards.
• CTRL - Fixed USW 24 display object is not consistent.
• CTRL - Do not allow v4 controller to be upgraded from v2.
• CTRL - Fixed Clients page, page numbering can get our of order.
• CTRL - Fixed ZH group, channel should be uneditable.
• CTRL - Fixed rate limit does not get push to user if set to another lower limit.
• CTRL - Fixed Hotspot display issue reported by forum.
• CTRL - Fixed advance adopted AP using stale 5Ghz channel width settings.
• CTRL - Fixed invalid payload when enabling/disabling dhcp settings and ip subnets.
• CTRL - Fixed incoming traffic through WAN from ip based SIP provider being dropped.
• CTRL - Fixed settings, wireless networks, wlan groups not working.
• CTRL - Fixed saving settings sub-views fails on second try.
• CTRL - Fixed ZH APs do not detect internet down.
• CTRL - Fixed windows java not executing the right path.
• CTRL - Fixed VOIP provider view stuck in saving.
• CTRL - Fixed incorrect call duration data.
• CTRL - Fixed backup filters out blocked users outside given time span reported by forum.
• CTRL - Fixed some security bugs.
• CTRL - Fixed controller/discovery too in some Win8.1 systems can not discover devices reported by forum.
• CTRL - Change 360 to 365 days in a year.
• CTRL - Fixed auto responder grammer.
• CTRL - Fixed refresh will always force to go back to controller panel.
• CTRL - Support switch dialog config multiple port at once.
• CTRL - Add format hint for guest portal redirect url.
• CTRL - Add support for SIP ALG disable/enable in config.properties.
• CTRL - Alert emails are done per site reported by forum.
• CTRL - Use static DNS if static is selected in USG reported by forum.
• CTRL - Allow Costa Rica radio tab to selectable channel width and channels.
• CTRL - Fixed switch stats items per page limit does not work.
• CTRL - Fixed can not set alias to known clients.
• CTRL - Fixed some missing events.
• CTRL - Change UVP upgrade timer so it will not show disconnected for a long time reported by forum.
• CTRL - Fixed STP blocking status icon inconsistent.
• CTRL - Fixed missing firewall rules for remote user vpn network.
• CTRL - Fixed extension menu not always shown.
• CTRL - Fixed wrong DHCP state in UniFi discovery tool.
• CTRL - Change UVP extension number length to 15 digits reported by forum.
• CTRL - Add support for ipsec site to site VPN to improve performance.
• CTRL - Create new group will always require an extension.
• CTRL - Allow emails in phone extensions to not be mandatory.
• CTRL - Fixed controller crash while changing network interface frequently.
• CTRL - Forgetting multiple wireless APs in uplink causes some to become isolated.
• CTRL - Fixed special characters in port forwarding description causes USG to go into provisioning loop reported by forum.
• CTRL - Updated copyright to 2015.
• UAPS - Fixed a case where wireless uplink stays isolated.
• UAPS - Fixed roaming statistics.
• UAPS - Fixed wireless uplink UAP LR stays isolated after a second wireless AP joins.
• UAPS - Fixed waiting for firmware upgrade loop.
• UAPs - Fixed a regression introduced in 3.2.7(fixing a crash) on rate limiting reported from forum.
• UAPs - Fixed wireless uplink monitor randomly resets the interfaces causing disconnects. Note, Please setup a gatway ip address if using wireless uplink. If not using wireless uplink, please disable wireless uplink monitor.
• UAPs - Fixed some memory leak in hostapd reported from forum.
• UAPs - Default timezone to UTC.
• UAPs - Fixed Guest Portal appends www.google.com to promotional URL if VLAN is enabled. This fix is needed along with v3.2.10 CTRL code or higher.
• UAPs - Fixed rate limiting not working in certain configs, regression introduced in 3.2.7 reported from forum.
• UAPs - Fixed radius accounting rounding account stop messages reported from forum.
• UAPS - Fixed help text when using stamgr.
• UAPS - Fixed hostname does not get updated sometimes.
• UAPs(except AC) - Disable UAPSD by default. For Spectral phone users, please change to enable in config.properties.
• UAP Pro - Improved 5Ghz HT40 performance with Intel6300.
• UAP Pro - Fixed ssh reboot along with toughswitch causes reboot loop.
• UAP AC - Corrected power display again from previous fix.
• UAP AC - Fixed AP can not pass PPPoE traffic reported from forum.
• UAP AC - Fixed kernel panic during heavy reset testing.
• UAP AC - Fixed Rogue AP reported as secured when it is open.
• UAP AC - Fixed DHCP offers containinng wrong subnet mask reported from forum.
• UAP AC - Added hostapd support for UAP ACS to help fix some WPA/2 Enterprise Radius issues reported from forum.
• UAP AC - Fixed rebooting issue after some stress SSID testing.
• UAP AC - Fixed STA Packet/byte counts is unreasonably low.
• UAP AC - Fixed kernel panic in certain wireless environments.
• UAP AC - Fixed sta reported info is not always accurate.
• UAP AC - Fixed phantom SSID(ethx/wlxx) broadcast on the air reported from forum.
• UVP App - Updated Play Store version to fix older Play Store update issues.
• UVP App - Added Play Movies to Google collections.
• UVP App - Fixed plug in headset and no sound output from volume adjustment report by forum.
• UVP App - Add speaker on/off button for sound recorder app.
• UVP App - Fixed default sip account index.
• UVP App - Add support for call button intent filter reported by forum.
• UVP App - Fixed contact page flicker when syncing contact.
• UVP App - Prevent app from running on other phones(smartphones).
• UVP App - Fixed inform url and inform ip in inform payload reported by forum.
• UVP App - Default to last screen after incoming call is disconnected.
• UVPs - Reduce some internal generated noise.
• UVP Pro - Fixed Wifi icon reported byforum.
• UVP Pro - Fixed Wifi SSID issue reported by forum.
• UVP Exec - Fixed speaker switching mode.
• UVP Pro/Exec - Added notification of WiFi disable if ethernet and WiFi is both connected.
• UVP Pro/Exec - Fixed crash when login to Google account when ethernet is not available.
• UVP Pro/Exec - Improve on Camera performance.
• UVP Pro/Exec - Disable Panoramic mode.
• USW - Fixed heartbeat missed in certain stressed condition and resource temporarily unavailable.
• USW - Fixed failed to upgrade during heavy stress testing.
• USG - Fixed stuck in reboot if downgrading software versions.
• USG - Inform DNS server for PPPOE connections.
• USG - Fixed wired clients stats are in reverse order.
• USG - Fixed memory leaks.
• USG - Fixed bootstrap webUI static ip shows connected to internet when it is not.

Feature Add:

• CTRL - Added USG/PBX feature(in Beta).
• CTRL - Added port forward support with ranges.
• CTRL - Added call log support for UVP.
• CTRL - Added ability to search for AP BSSID.
• CTRL - Added more info on roaming event messages.
• CTRL - Added IPPay Support to hotspot.
• CTRL - Added Switch Stats to Insights.
• CTRL - Added support for allowing changing of config for disconnected AP.
• CTRL - Added DNS configuration for all USG connection types.
• CTRL - Added hostname for unauthorized guest in hotspot manager.
• USG - Add set inform URL to bootstrap UI.

Change List:

• CTRL - version change from v4.5.2 to v4.6.0
• CTRL - Fixed wireless link coloring.
• CTRL - Fixed wired client events.
• CTRL - Fixed clients has no uplink port info in a site without USG.
• CTRL - Fixed invalid wired client disconnect events when topology change.
• CTRL - Only request DHCP for guest VLAN when guest portal is enabled.
• CTRL - Fixed unexpected mouse cursor in maps with firefox browser.
• CTRL - Fixed uncaught error when adding sites and maps.
• CTRL - Fixed placed devices disappears from map when upload image is replaced with google map.
• CTRL - Fixed cursor spins continously in bootstrap UI in USG.
• CTRL - Fixed UVP can not connect to PBX after VOIP network changes.
• CTRL - Fixed client uplink port reporting does not change on USW.
• CTRL - Fixed AP coverage halo becomes unattached to AP after map zooms.
• CTRL - Fixed insight pages are not updated properly.
• CTRL - Fixed UI crash when moving map zoom bar up and down.
• CTRL - Removed embargoed countries from country selection as well as removed Japan.
• CTRL - Fixed AP upgrade button toggling on/off for unadopted devices.
• CTRL - Fixed failure when restoring a backup file.
• CTRL - Map halo is incorrect when radio is in off state.
• CTRL - Fixed disconnected devices removed from the map.
• CTRL - Fixed sorting on Switch UI tab.
• CTRL - Fixed error shown when saving network edits.
• CTRL - Fixed mouse tool tips not refreshing properly in some cases.
• CTRL - Fixed error message when forgetting isolated devices.
• CTRL - Fixed unexpected charater in the USW Native Network field.
• CTRL - Fixed filtering not working correctly in "Events".
• CTRL - Fixed refresh rate is not sticky.
• CTRL - Fixed APs shows up as clients in insights.
• CTRL - Fixed make controller discoverable on L2 Network reported from forum.
• CTRL - Fixed switch going to full provision for a port POE change reported from forum.
• CTRL - Fixed moving the switch from one site to another and apply a config shows an error message.
• CTRL - Fixed to update PBX if timezone changes.
• CTRL - Fixed changing extensions sometimes does not get updated correctly.
• CTRL - Fixed UVP were not allowed to move from site to site.
• CTRL - Improved UI of 48 port switch device tab.
• CTRL - Fixed stuck in saving in the settings tab.
• CTRL - Fixed UI being slow when adding/removing device objects in maps.
• CTRL - Fixed controller client does not show up at insights until noted.
• CTRL - Clearly label phones without extension assignments.
• CTRL - Fixed Config.properties was not honored reported from forum.
• CTRL - Fixed Timezone during initial setup is not reflected after the setup.
• CTRL - Fixed network stats update only if port is up.
• CTRL - Fixed captive portal not authorizing guest. Please update your portal pages with updated scripts provided.
• CTRL - Fixed unplaced devices are gone if placed on a deleted map.
• CTRL - Fixed internal names appearing in invite email.
• CTRL - Enable HT80 support for South Africa on UAP AC reported from forum.
• CTRL - Fixed antenna gain should not be editable in most models.
• CTRL - Fixed duplicate entries in admin email section.
• CTRL - Make historical data selection sticky.
• CTRL - Fixed device disappears from map view forever if map deleted.
• CTRL - Fixed controlller logging selection to be sticky.
• CTRL - Fixed default map displays off center when deleting another map.
• CTRL - Fixed alert icon consistency.
• CTRL - Fixed statistics→Recent activitives at the latest point always shows 0 clients.
• CTRL - Fixed ubuntu install message to show correct plural form.
• CTRL - Fixed insight past connection/guest is off by an hour.
• CTRL - Show audio upload format supported for Auto Responder.
• USW - Fixed failed to bootup in stress warm reboot testing.
• USW - Add delay before switching POE power.
• USW - Updated switch stats in insights.
• USW - Fixed changing POE voltages would not require full re-provision and add enhanced provisioning.
• USW - Fixed flow control is not properly configured when it's enabled on controller.
• USG - Fixed USG adoption failure.
• USG - Add byte count for port forwarding.
• USG - Fixed USG reboot loop in certain configs.
• USG - Fixed USG failed to reboot after a failed applied config.
• USG - Fixed incorrect uptime.
• USG - Fixed making sure to use updated mac for booting.
• USG - Fixed some wired client reported events.
• USG - Fixed bootstrap UI timer continously spins.
• UVP - Adjust handset mic/speaker gain.
• UVP - Fixed some POE Brick ethernet interoperability.
• UVP - Enable BT/Wifi/Camera support for supported models.
• UVP - Adjust headset speaker gain.
• UVP - Fixed volume not persistent after reboot.
• UVP - Fixed notifications to either use LED or LCD.
• UVP - Remove wifi interface properties for UVP reported from forum.
• UVP - Fixed memory leak on BT drivers.
• UVP - Make auto launching phone app when handset is lifted configurable.
• UVP - Fixed incall-page volume seekbar level.
• UVP - Fixed play call waiting tone instead of ringtone if audio mode is in call reported from forum.
• UVP - Fixed call waiting with different codecs causes no sound in certain cases.
• UVP - Disable Software-echo-suppression by default.
• UVP - Fix mute status of call reported from forum.
• UVP - Disable wizard setup for wifi supported models.
• UVP - Updated manufacturing properties reported from forum.
• UVP - Fixed sluggish/hang issue on BT supported models.
• UVP - Add Spanish translation.
• UVP - Format dialpad number by locale.
• UVP - Improve handset audio quality.
• UVP - Improve audio call latency.

Known Limitations

• Call Logs are not 100% accurate.
• UVP must be used with USG unless you setup a third party router to map unifi to the controller IP address and being able to resolve unifi = controller ip.
• Reminder that Controller will not prevent creating ext numbers that overlaps with emergency services.