4.9 UniFi Controller Consolidated Change Log

4.9.4

New Features:

Bugfixes/changes since 4.9.2:

[CTLR] Remove limit on printing vouchers (previously set to 3,000).
[CTLR] Fix issue where guest repeatedly unauthorized.
[UAPG2] Fixes which should prevent intermittent loss of IP connectivity.
[UAPG2] Fix issue with 5G DVLAN.
[UAPG2] Add LLDP support to fix Cisco PoE issue.
[UAPG2] Apply some fixes for spectrum scanning.
[UAPG2] Disable LDP debug server by default.
[UAP-IW] Fix issue with management VLAN.
[UAP] Fix issue with discovery v1 response.
[UAP] Fix memory leak on 1st gen AC (UAP-AC, UAP-AC v2, and UAP-AC-Outdoor).
[UAP] Add LLDP/CDP support to fix Cisco PoE issue.
[UAP] Revert patch for multicast rate issue when 802.11b STA present.
[USW] Make SDP logging less verbose.
[USW] Fix ambiguous fan level for US-16-150W.
[USG] Fix crash in offload which caused unexpected reboots of USG/USG-Pro-4.
[USG] Fix issue with packet corruption when ipv4 offload is enabled.
[USG] Fix NAT leaking issue, causing issues with some sites.
[USG] Fix issue with hotspot redirect, when USG handling redirect instead of UAP.
[USG] Fix issue with SNMP info not being populated.
[USG] Add support for comma separated entries for OpenVPN.
[USG] Fix NAT hairpin when dual WAN enabled.
[USG] Add rule offset when custom firewall/NAT rules in config.gateway.json.
[USG] Fix issue with client rate limiting.
[USG] Fix inform issue with various dual WAN configs.

New Features:

[UAPG2] Add RADIUS controlled VLAN support (see notes below download links).
[UAPIW] Add Ethernet VLAN tag option. Enable via device properties>configuration>services. This will add ports tab in device properties window.
[UAPIW] Add reset button enable/disable function (device properties>configuration>reset button).
[USW] Add VLAN overview within port configuration.

Bugfixes/Changes:

[CTLR] Fix dll injection vulnerability on Windows installer (details HERE).
[CTLR] Hash admin password, this means x_password is no longer used (see notes about this)

–plaintext x_password is removed from database. it is replaced by a hashed version x_shadow (salted SHA-512 hash) –https://community.ubnt.com/t5/UniFi-Feature-Requests/Hashing-the-passwords-Do-not-store-in-clear-text/idi-p/680351

bandsteering is default disabled and ATF remains default enabled. There's no change on this.

[UAPG2] Fix RF scan missing DFS channels.
[UAPG2] Add missing channel 144 (region dependent).
[UAPG2] Fix 1st gen>2nd gen wireless uplink interop issue.
[UAPG2] Fix wireless uplink VLAN issue.
[UAPG2] Fix rate table init logic.
[UAPG2] Adjustments which should help lessen intermittent connectivity experienced with some devices.
[UAPG2] Bypass netfilter code on non-guest VAPs. Please see known limitations listed HERE.
[UAPG2] Fix issue with ATF on 2G.
[UAP] Code changes to fix mem leak experienced in certain scenarios.
[UAP] Modify bandsteering behaviour to fix issue with some 2G devices.
[UAP] Refined Noise Floor calibration algorithm.
[UAP] Make ntpclient more persistent.
[UAP] Fix bug with WPA-Enterprise on 1st gen AC models.
[UAP] Fix multicast rates, with STA that use older protocols.
[USW] Decrease log verbosity when STP is disabled.
[UGW] Adjust DPI data handling, which is first step to help prevent unexpected reboots.

New Features:

[CTLR] Add show system config function - simple overview of site configuration.
[CTLR] Add web terminal for USW (Device properties>Configuration>Advanced Config>Debug Terminal)
[UAPG2] Add ATF to UI
[UAPG2] Enable DFS for non US/CA
[USG] Add option for USG to configure VOIP port as WAN2 (Settings>Site>USG Port Remapping)
[USG] Add LAN2 config for USG-Pro-4
[USG] Add weighted load balance option for dual WAN
[USG] Add VPN clients/site-to-site configs to UI under Settings>Networks.

Bugfixes/Changes:

[CTLR] Fix missing bandsteering config for gen2 UAPs.
[CTLR] Fix issue restoring backup in IE.
[CTLR] Add some extra verification to network input.
[CTLR] Add some extra verification to DDNS input.
[CTLR] Fix double provisioning when setting VLAN on WAN.
[UAP] Revise ebtables rules for non-guest SSID.
[UAP] Adjust beacon to fix issue with some devices connecting to 1st gen AC.
[UAP] Fixes for issues with devices connecting to UAP-Pro when bandsteering enabled.
[UAP] Fix some race issues with mcad and uplink-monitor.
[UAP] Add fixes for users able to bypass portal with DNS2TCP.
[UAP] Make ntpclient more persistent.
[UAPG2] Fix 1st gen>2nd gen wireless uplink interop issue.
[UAPG2] Fix rate table init logic.
[UAPG2] Fix multicast rates, which was causing some devices (especially using older protocols).
[USG] Fix block user function.
[USG] Add fixes for users able to bypass portal with DNS2TCP.
[USG] Fixes for issues with portal caused by dual WAN.
[USW] Add mass power cycle option to reboot button.