5.5 UniFi Controller Consolidated Change Log
5.5.27
Controller bugfixes/changes since 5.5.26:
5.5.26
Controller bugfixes/changes since 5.5.24:
5.5.24
Controller bugfixes/changes since 5.5.23:
Fix for wrong data in VLAN column in WLAN list.
Revert "change auto VPN VTI subnet mask to /30" as it needs to be reworked.
Various backend fixes and improvements.
Security improvements.
5.5.23
Controller bugfixes/changes since 5.5.22:
5.5.22
Controller bugfixes/changes since 5.5.21:
Display WLANs table in Property Panel for In-Wall.
Fix an issue preventing switch ports from coming up after being disabled.
Fix a bug with IW causing the port to be disabled when the VLAN is off.
Fix a backend bug with guest access.
5.5.21
Controller bugfixes/changes since 5.5.20:
MAC address input validation improvements.
Fix a provisioning issue which would clear USG WAN settings.
Improvements for Ethernet bonding support on UAPs (on supported devices).
Improve topology view when using wireless uplinks.
Allow setting device credentials during setup and new site wizards.
Security improvements.
Various backend fixes and improvements.
5.5.20
Controller bugfixes/changes since 5.5.19:
Fix port mirroring range.
Fix app with Chinese translations.
Add Google to social transactions.
Do not display number of clients for site-to-site VPN.
Limit MAC
ACL list to 512 per WLAN group.
Add VAP BSSID filter to devices page.
Fix the issue causing storm control settings to be provisioned, even when disabled.
Update bundled Tomcat to 7.0.79.
Always deploy WAN_OUT firewall rules and remove config.properties control.
Improve 802.1X provisioning on USW, so that switch does not get blocked.
Fix site-to-site connection status on VPN health widget.
Improvement to the broadcast/multicast filter.
Various security improvements.
5.5.19
Controller bugfixes/changes since 5.5.18:
5.5.18
Controller bugfixes/changes since 5.5.17:
Fix Hotspot Analytics date range when switching between Guests and Hotspot Analytics.
Fix changing rules order in firewall.
Fix the issue when creating firewall groups.
Raise the WLAN group load balance limit to 200.
Fix a bug causing duplicate downlinks to show in the controller UI.
Fix group AP editing issue.
Update OUI table.
5.5.17
Controller bugfixes/changes since 5.5.16:
5.5.16
Controller bugfixes/changes since 5.5.15:
Allow RADIUS Profile secret to accept any string.
Hide RADIUS Profile secret for read-only admins.
Improve VPN health status.
Fix wired uplink stats on AC-HD when using bonding.
Fix an issue when trying to register controller with UniFi cloud tie in (unifi.ubnt.com).
Fix DB migration issue, which caused stats to not be visible in the UI post upgrade when upgrading from ⇐5.4.x.
Various backend improvements.
Controller bugfixes/changes ported from 5.4.18:
5.5.15
Controller bugfixes/changes since 5.5.14:
Fix clearing statistics.
Add HSTS support (default disabled). Controllable via system.properties only.
Fix uplink status when using bonding on AC-HD.
Fix an issue with the remote IP in WebRTC logging, previously was always 127.0.0.1.
Various backend improvements.
5.5.14
Controller bugfixes/changes since 5.5.12:
Fix services link not visible on mobiles.
Fix removing items on WebRTC connection.
Allow antenna gain of 0.
Support UAP-AC-IW-Pro.
Support USW L2 PoE.
Increase broadcast and multicast MAC limit to 256 per site.
Update WebRTC JNI to v1.0.17.
Update bundled Tomcat package to 7.0.78
Controller bugfixes/changes since 5.5.11 (in unreleased 5.5.12):
Updated firewall rule button styles.
Use bps instead of bytes per seconds.
Fix problem with enabling Cloud Access.
Handling ESC on cloud access modal.
Restrict 5 minutes data retention.
Switch port usage graph: prevent displaying connected both Device and Client.
Update bundled snappy-java to 1.1.2.6.
Update bundled JRE to 8u131 b11 for Mac controller.
Improve WebRTC debugging.
A security improvement.
Fix an issue when granting admin privileges on a site.
A DB migration improvement.
Generate a SHA512 password if device firmware is capable of it.
Update OUI table.
Remove TLSv1 from default SSL protocols for Java 7/8.
5.5.11
Controller bugfixes/changes since 5.5.10:
Move the AP channel utilization graph into the header.
Add memory and load avg. to device list columns.
Show only adopted APs in Recent Activities in Statistics.
Rename all-time top client.
Update validation hint for maximum number of stations in wireless network group.
Show DB migration progress.
Grey out disabled WLAN rows in Property Panel.
Improve chart animations.
Add autofocus on 2FA token field.
Allow cancel migration of device.
Fix Not Authorized/Bad Request on first launch after accepting SDN Invitation.
Fix WAN load balance config, so that it actually provisions to the USG.
DB migration improvements.
Fix firewall rule validation.
Improve
LAN address identification on USG.
5.5.10
Controller bugfixes/changes since 5.5.9 (in unreleased 5.5.10):
Fixed map list unplaced device sorting.
Add UniFi AP AC In Wall hybrid capability.
Allow switch downlinks table to scroll.
Updated WLAN group load balancing limit.
Add new AT switches.
Fix memory leak in WebRTC.
Improve WebRTC performance.
Improve WebSocket performance.
Improve FQDN regex.
Fix VLAN validation.
Improve performance on Statistics/Overview page.
Allow migrate only adopted and connected devices.
Enhance PayPal labels and password field.
Do not display FB and Google section if FB or Google was enabled for AngularJS and then switched to Legacy JSP.
Update WebRTC JNI.
Update bundled Tomcat.
Pull config version on device refresh.
Error log when attempting to update a config of an unadopted devices.
Support SSO Cloud Access with 2FA.
Time series improvement and bugfix.
Various backend improvements.
5.5.9
Controller bugfixes/changes since 5.5.8:
Add pagination in Settings / Network list.
Disallow svg upload for guest portal images.
Fix displaying sections on Guest Control settings page.
Fix radius user save over WebRTC.
Fix clickable area of alerts full screen button.
Fix site settings save error.
Fix refreshing networks in switch property panel on network add/remove.
Security improvements.
Update the bundled WebRTC JNI package.
Sign Windows installer package.
Remove restricted U-NII-2C channels when Canada country code is set.
5.5.8
Controller bugfixes/changes since 5.5.7:
Fix auto backup data retention days.
Hide UGW port remap if UGW4 exists.
Use RADIUS assigned VLAN only for WPA-EAP.
Display link to Hotspot Manager in Site Switcher only if Guest Portal is enabled.
Fix 404 error when switching sites while editing.
Fix e-mail validation.
Use monthly value as default occurrence in Auto Backup settings.
Fix number of devices in filter buttons on Known Clients page.
Restore open panel functionality from device marker on map.
Enable reset button after hotspot package removal.
Improve Cloud Connection error tooltip.
Improve header icons.
Improve placeholders and regular expressions.
Add FQDN or local validation to domain name.
Fix port forward validations.
Fix domain name validation.
Fix issue with controller causing too many directs (controller side fix for UNIFI-457).
Add validation for RADIUS profile VLAN mode.
Fix issue with community string changing to public, regardless of configured value.
5.5.7
Controller bugfixes/changes since 5.5.6:
Add Hotspot Manager link to site switcher.
Relocate Hotspot 2.0 to Services section.
Add option to report WebRTC connection errors to cloud.
Use lower scale Throughput graph to increase rendering performance on Safari/iOS.
Enable tunnelled reply by default.
Improve vouchers quota.
Update translations.
Improve date picker.
Allow displaying WLAN schedule in 24 hour format when "Use 24-hour time" preference is on.
Adapt no data / no security gateway messages on Dashboard page.
Fix device menu when toggling small/normal markers on Map page.
Fix icons on clients graph on Dashboard page.
Fix speed test column chart.
Fix USG badge and tooltip on DPI Settings page.
Fix typo in validation hints for IP.
Improve locate button behaviour.
Update OUI table.
Show L2TP remote user VPN on dashboard, and remote user VPN insights.
Fix issue where the local
DNS record for unifi may not provision when using USG.
Fix an issue with current day stats being improperly calculated.
Fix an issue with fixed IP handling.
5.5.6
New Features:
Controller bugfixes/changes since 5.5.5:
Batch edit clients.
Display channel names in new consistent way - e.g. 3 (1,+1) HT40, 151 (149,+1) VHT40
Allow disabling site-to-site VPN.
Enable finding device on map in read only mode.
Fix values for data retention in Maintenance Settings.
Display only historical rx/tx bytes on Known Clients page.
Change guest authorization status to display expiration date when expired.
Use Angular templates by default in Guest Authorization Settings.
Remove "new" badge from Angular templates and remove "beta" badge from template overrides and languages
Fix expiration dropdown on Guest Control settings page.
Fix success messages on saving configuration.
Fix various Auto Backup setting issues.
Fix latency color in legend of Throughput graph.
Small UI Improvements.
Remove VoIP interface from controller.
Update WebRTC library.
Default enable MSS clamping on VTI.
5.5.5
New Features:
Controller bugfixes/changes since 5.5.4:
Show AP channel utilization in Properties and Devices list page.
Add granularity to Statistics (5mins/1h/1d).
Configure Data Retention for each granularity of Statistics in Settings/Maintenance.
Redesign inputs for date picking.
Increase precision of Throughput chart on Dashboard page.
Add Force Provision button to Properties/Manage Device.
Add PMF controller to WLAN group settings.
Add first seen column to Known Clients list page.
Add free-trial authorization column to Guests list in HostSpot Manager.
Show Gateway column in Payments and Social views in HostSpot Manager.
Fix USG/USG-P4 port labels.
Fix displaying Hotspot Analytics page when Guest Portal is disabled.
Fix client status ordering.
Show terminal for UAP-AC-IW.
Change Revoke RADIUS user to Delete with new icon.
Add - as placeholder.
Rename Name server placeholder to
DNS server.
Fix content of tooltips on Dashboard page.
Prohibit deselecting current device in Performance view.
Added icon to switch port list.
Improve Insights > Switch stats.
Fix data retention values in Settings.
Fix changing granularity in Statistics > Performance page.
Change Revoke button to Delete button on Admins list.
Fix issue with sending large files over WebRTC (i.e. backups).
Prohibit 0.0.0.0 as an address-group member, as it isn't a valid entry in the firmware.
Fix missing TX packets in VPN health data.
Improve some backend validations.
Controller bugfixes/changes ported from 5.4.12:
5.5.4
New Features from 5.5.3:
Controller bugfixes/changes since 5.5.3:
Fix tooltip positioning.
Make Edit Account frame bigger to make enough room for labels in all languages.
Allow to edit firewalls settings when no USG is adopted.
Animate map menu.
Remove RADIUS VLAN from wireless networks.
Fix RADIUS Tunnel Type validation.
Extend Radius server validation to not allow disabling it if there is a device that uses Default profile.
RADIUS user form fixes and improvements.
RADIUS improvements.
Fix missing list of RADIUS Profiles in property panel switch configuration.
Highlight Topology paths.
Move Settings RADIUS to Services section.
Fix Statistics Overview initializer.
Batch restart APs.
Topology Improvements.
Improve Topology detection.
Switch Statistics: show device connected to a port.
Map Marker Button: tweak icons position.
Improve Notify Device Requirement performance.
SVG Map zooming improvement.
Fix pending change tag color.
Remove BETA badge from RADIUS assigned VLAN for Wireless Network.
Allow AP properties WLAN table to wrap.
Devices - grey out entries when WLAN group is off.
Fix speed test ping translation.
Preferences: Add save & close button.
Firewalls - Limit group name to 31 characters.
Update translations.
Update bundled Tomcat to 7.0.75.
Remove config.properties USG ICMP items.
Controller bugfixes/changes ported from 5.4.11:
Add Migrate Site (Export Site) Wizard.
Fix slow database backup.
Fix RADIUS profile migration issue.
Elite Controller only:
5.5.3
New Features:
Controller bugfixes/changes since 5.5.2:
Fix issue with unused cache not clearing as expected, causing controller to die because of a memory leak.
Add missing firewall rule for L2TP server.
Add colour to RF scan results.
Add missing SFP module info tooltips for UniFi Switch.
Various RADIUS validations added.
Set max SSID length to 32 characters.
Various topology view improvements.
Add ability to mark rogue APs as known.
Add support for Catalan, Norwegian (Bokmal) and Slovak languages on Hotspot.
Add validation for USG/USW SNMP community string.
Controller Bugfixes/Changes ported from 5.4.10:
Elite Controller only:
5.5.2
New Features:
Controller bugfixes/changes since 5.5.1:
Fix RADIUS config validation.
Allow to Configure RADIUS section only when USG is available.
Fix the issue with autobackup not running and leaving the controller in a busy state until a service restart.
Controller bugfixes/changes ported from 5.4.9:
Improve dynamic Dashboard.
Improve loading DPI statistics.
Improve Topology view.
Improve Image Map performance.
Update translations.
Add Catalan translations .
Fix saving Settings > Controller.
Add user group override notice, client list user group column.
Fix panel expand/collapse icon aliasing.
Added LAG support to AP > Network configuration.
Add limited amount of
LAN DHCP leases notice.
Add minRSSI noise floor notice.
Add expand/collapse icon to device list actions column.
Disallow SVG image type in Maps.
Add progress bar for backup upload.
Fix the issue with the missing configuration tab after using site import/export.
5.5.1
Controller Bugfixes/changes since 5.5.0:
Add AP tagging.
Support FreeRADIUS.
Add device configuration warning bar with real time input updates.
Make Dashboard widgets configurable.
Update color used for upload and download values.
Rename vpn client to vpn type.
Set next hop for static route as default.
Remove voip option from available networks purposes.
Fix initial value of data retention days.
Add special icons for UCK client.
Performance improvements on Dashboard.
Add beta warning for languages other than English.
Add Turkish translations.
Update translations.
Add Danish, Norwegian and Turkish to the languages supported by Hotspot Portal.
Add button for toggling clients visibility on Topology view.
Controller Bugfixes/Changes Ported from 5.4.7:
Fix installing Discovery Tool.
Fix bypassing find devices with L3.
Fix RADIUS profile saving.
Fix preference panel refresh rate not populating on change.
Improve layout of Switch Statistics view.
Increase width of terminal.
Auto fit too big image when the zoom level is not set on image map.
Set storm control packet minimum to 100.
5.5.0
Controller Bugfixes/changes since 5.4.7: