5.7 UniFi Controller Consolidated Change Log
5.7.28
Controller bugfixes/changes since 5.7.27:
Add translation for USW events like POE disconnection and POE overloading.
Fix timezone selection in Wizard.
Fix
DNS rules for guest VLANs.
Fix restoring from autobackup on SD card.
Hide Fast Roaming feature for Open networks.
Various backend bugfixes and improvements.
5.7.27
Controller bugfixes/changes since 5.7.26:
Rename duplicated translation key for connectivity monitor.
Fix a bug that could prevent admins from being able to switch sites.
Improve accuracy of reported wireless uplink candidates.
Various backend bugfixes and improvements.
5.7.26
Controller bugfixes/changes since 5.7.25:
Fix empty Radio Type dropdown on Performance page.
Fix client signal binding.
Fix downloading autobackup via unifi.ubnt.com.
Fix available wireless uplinks so disabled radios/APs are not displayed.
Fix a bug with L3 wireless adoption.
Hide Elite ToS accept button for not supported countries in property panel.
Temporarily limit MongoDB support to releases prior to 3.6.x (currently 3.4.14 is recommended).
Various backend bugfixes and improvements.
5.7.25
New Features:
Controller bugfixes/changes since 5.7.23:
Add tooltip/help to Connectivity Monitor.
Improving autobackup handling for UCK with limited storage.
Update outdoor mode checkbox label.
Update timezones to match tzdata.
Add bypass for confirm before device downgrade.
Fix IPv6 PD Prefix ID validation and config generation.
Hide per radio vwire control when connectivity setting is disabled.
Fix incorrect client signal value in ap's property panel and clients list.
Fix incorrect internet traffic count for wireless clients.
Hide configuration section in Elite Device settings when Cloud Access is off.
Hide Elite ToS accept button for not supported countries.
Mask password characters for RADIUS hotspot.
Various backend bugfixes and improvements.
5.7.23
Controller bugfixes/changes since 5.7.22:
Adding USG alias validation.
Fix broken batch config for radios.
Fix for clients counters in property panel.
Fix cut RF Scan tooltip.
Fix IPv6 RA attributes.
Fix RADIUS auth and accounting on guest networks when using USG.
Improve reliability of topology.
Various backend bugfixes and improvements.
5.7.22
Controller bugfixes/changes since 5.7.21:
Prevent port forwards from interfering with IPsec and vice versa.
Fix an issue causing the controller to be factory reset.
Improve configured wireless uplink notifications.
Various backend bugfixes and improvements.
5.7.21
Controller bugfixes/changes since 5.7.20:
Mark allow meshing option as beta feature.
Adding opening property panel directly with alerts tab for devices with warnings.
Adding RADIUS VLANs - tooltip.
Fix filtering virtual devices on maps.
Fix empty UI after clicking Escape on Missing SD card dialog.
Fix broken RA configuration on VLANs.
Fixing enabling cloud access from site admins.
Hide message when controller minor version has not changed.
Improve wireless adoption process.
Conditionally enable journalling on UCK after successful migration.
Various backend bugfixes and improvements.
5.7.20
Controller bugfixes/changes since 5.7.19:
Improve Neighboring Access Points loading.
Update Wireless Uplink information text.
User Groups - setting limits more flexible.
Fixing WebSocket error for site admin without Show pending devices permission.
Fixing incorrect debug terminal connection state after closing panel.
Removed second performance word from real-time tooltip.
Fix invisible debug terminal when device is RF scanning.
Fix set switch port profile native network as 'None'.
Reduce port stats log level to fix unnecessary log spam.
PPPoE IPv6 provisioning improvements.
Improve guest portal handling on gateway devices.
Fix validation of IPv6 IPs as group members.
Various backend bugfixes and improvements.
5.7.19
Controller bugfixes/changes since 5.7.18:
Fix downgrade button title.
Fix password field validation in edit account form.
Find the correct uplink on devices with native bonding.
Various backend bugfixes and improvements.
5.7.18
Controller bugfixes/changes since 5.7.15:
Display security warning when superadmin uses the same password for SSH devices authorization.
Enable Show Pending Devices permission when Advanced Features for site are enabled.
Hide Switch temperature if sensor is not present.
Show RF Scan only for devices with proper Wi-Fi capabilities.
Remove non AP devices from virtual devices list.
Display downgrade button if lower version is detected.
Don't disable "Sign In" button on login page.
Clarify IPS alert wording.
Disable hardware offload on USG when Smart Queue QoS is enabled.
Fix default 5G channel width.
Fix Topology console error.
Fix Debugging Metrics.
Fix load page error in IE11.
Fix missing alerts tab.
Fix site changing over WebRTC for latest Firefox.
Fix for missing filters in clients tab.
Fix WebRTC establish connection retry mechanism.
Fix display interface stats for USG-XG.
Fix factory reset issue on UCK.
Fix pre-adoption upgrade of USG devices.
Fix VPN status reporting.
Lower RSSI requirements for wireless adoption.
Remove reboot before upgrade logic from UAP upgrades.
Various backend bugfixes and improvements.
5.7.15
Controller bugfixes/changes since 5.7.12:
Add a validation message to the missing redirect using hostname once any social authentication method is enabled.
Allow upper case letter in email.
Moved device warnings to new tab in property panel.
Added warnings count in device status badge.
Merged Users and Guests tabs in property panel.
Maps: show error when saving coordinates of device on map failed.
Statistics - disallow future date in date range picker.
Allow displaying negative temperatures for switches.
Fixing not opening DPI clients.
Mark Google transactions as social in Hotspot Manager.
Fix disappearing devices on site change.
Fix selected tab in property panel when current active tab is missing.
Fix downloading large backups over WebRTC.
Fix closing property panel when changing site.
Fix connection fail after changing granularity on Statistics page with WebRtc and refreshing the page.
AC InWall not showing any data in Switch Statistics view.
Fixing filtering virtual devices on map.
Fix case when incorrect port table contents cause Topology not to render.
Fix a bug preventing email password recovery from functioning in some cases.
Various hardware provisioning improvements.
Various backend bugfixes and improvements.
5.7.12
Controller bugfixes/changes since 5.7.11:
In order for an AP to be capable of becoming a Mesh AP, the setting must be set in device config.
Maps: show error when saving coordinates of device on map failed.
Fix ETC menu on Hotspot Manager Page.
Fix In Hotspot manager part of tooltip is displayed outside the graph.
Incorrect client signal value in property panel, section Statistics.
Added missing event handling for Pending Adoption Wireless discovery.
Improvements for RADIUS profile migration at time of controller upgrade.
Various backend bugfixes and improvements.
5.7.11
Controller bugfixes/changes since 5.7.10:
Add message with instruction to csv upload.
Add model
EOL (end of life) pending warning.
Additional charts for Devices (Statistics → Performance view).
Drag and drop optimizations.
Expand firewall group name limit to 64.
Hide the Aggregation option under Network when UAP supports it natively.
Improve way how Donut charts display tooltips, to prevent being overlapped by other elements.
IPv6 - Add DHCPv6
DNS Control.
Lock web store to US only.
Fix displaying selected priority wireless uplink.
Fix displaying blank page on double click on Insights.
Fix filtering outdoor channels by using default value for outdoor mode.
Fix handling error responses received via WebRTC channel.
Fix missing action buttons after enabling cloud access.
Fix saving RADIUS profile without accounting servers.
Fix radios sorting in Configure Radios section.
GeoIP Filtering - Block incoming/outgoing/both traffic.
Temporarily remove WAN/WAN2 IPv6 PPPoE option.
Rename label Select group to Any in firewall's form.
SNMPv3 - Username and Password validation to match SNMPv3 standard and USG requirements.
Show Hardware Offload as off when IPS is enabled, don't allow it to be turned on.
Map fixes: Devices disappearing from map when changing from legacy to designer without saving and cannot change map type from Google to image at the second time.
Several device management improvements, to improve UX and mitigate some errors.
Various backend bugfixes and improvements.
5.7.10
New Features:
Controller bugfixes/changes since 5.7.9:
Add message with instruction to csv upload.
Expand firewall group name limit to 64.
Improve way how Donut charts display tooltips, to prevent being overlapped by other elements.
IPv6 - Add DHCPv6
DNS Control.
Additional charts for Devices (Statistics → Performance view).
Fix: client history rate has wrong units.
Fix: client history signal chart goes off the scale.
Fix enabling https redirection when switching between authentication methods.
Fix issue where USW management VLAN would reset to defaults on controller upgrade.
Hide IPv6 address at network's list when network type is not 'static'.
SVG Maps - Clicking on RF button next to the device doesn't open RF tab from device.
Improve alerts from IDS/IPS.
update nanoHD name.
Add workaround for Cloud Key firmware upgrade issue, for devices on firmware 0.8.1 to 0.8.4.
Apply the same rules for both TCP and UDP
DNS.
Various backend bugfixes and improvements.
5.7.9
New Features
Controller bugfixes/changes since 5.7.8:
Display WLANs in System Config with Multicast and Broadcast blocking enabled.
Display Default Expiration Time field for Hotspot and Facebook WiFi.
Disable HTTPS redirection for Facebook, Facebook WiFi and Google.
Do not remember Client Statistics page as last opened page.
Fix cloud access
GUI pages for multiple super admins.
Fix Auto Channel dialog which hides map device labels.
Fix Device location opens map with wrong coordinates.
Fix Missing Traffic Stats data on first load.
Fix Invisible coverage in maps after opening property panel and then moving AP.
Fix resolving devices on Neighboring Access Points page.
Fix too much space for BSSID tooltip in device list.
Fix: Unable to place devices on designer map.
Fix USG does not have Last Seen field.
Fix DHCP relay configuration.
Improved UI of Cloud Access Settings page.
Add AP name to radar detected event.
Allow DPI to be enabled when offload is disabled (if the firmware supports it).
5.7.8
New Features
Controller bugfixes/changes since 5.7.7:
Add a tooltip to OpenVPN shared key UI.
-
Add progress info about loading Map.
Display tooltip in case of attempt to adopt multiple gateways to one site.
Additional DPI application icons (i.e. Slack).
Improve performance of Neighboring Access Points page.
Update translations.
Add elite device events to notifications settings.
Fix console error when no map is defined.
Fix Date range selector in narrow web browser window.
Fix missing DPI users (name & icon).
Fix missing location alias Neighboring Access Points page.
Fix upload of map image during remote access.
IPv6 - save dhcpv6_pd_size as string.
Enable dead peer detection (DPD) on auto-S2S VPN.
Exclude WAN subnets from policy routing, which fixes issues like THIS.
Add NAT of other WAN IPs out of WANs, fixing several issues related to multi-WAN.
5.7.7
New Features
Add IPv6 support (Beta).
Add restart devices permission.
Add support for new Elite Device service.
Add Bulgarian translations to the Hotspot Portal.
Controller bugfixes/changes since 5.7.4:
Add overflow menu icon in top right corner.
Add customize columns to switch properties port list.
Add WebGL support detection on Maps.
Allow to open debug terminal and airtime/airview in the same time.
Allow to use
URL for DHCP TFTP Server in Network configuration.
Include AC InWall in Statistics/Switch view.
Remember last visited Insights, Stats and Maps page.
Topology view: show bonding enabled on AP-HD.
Fix case when Calendar dropdown is cut off on small screens.
Fix client name not showing correctly in DPI Application Usage widget.
Fix collapsible cells in device table.
Fix disabling Hotspot Welcome Text.
Fix empty tabs in property panel after adopting device in Managed by Other state.
Fix for Topology view - AP channels are hidden after collapsing and restoring parent node.
Fix positioning line chart's tooltip on narrow screens, when the chart is too close to the top of container.
Fix remembering rows per page on Insights pages.
Fix selecting default Echo Server in the USG Advanced Settings.
Fix USG memory usage and average load is not displayed in devices list.
Fix Wi-Fi icon on
OS X High Sierra (Chrome & Firefox).
Fix WLAN VLAN range.
Fix no DPI data for some time in users tab in traffic stats.
Setting RF Scanning state just after scan is started.
Improve default allocation logic to make it more suitable for memory constrained systems (see our notice HERE).
Various backend improvements and bugfixes.
5.7.4
New Features
Batch remove vouchers.
Customize voucher columns.
Ability to display historical statistics per Client (traffic, packets, signal power etc.).
Add support for SNMPv3.
Controller bugfixes/changes since 5.7.3:
Add "Reset columns" dropdown to client list column selector.
Add uplink to device list.
Confirm before setting PoE mode to 24v passive or passthrough.
Make TX/RX labels consistent.
Always show at least the primary channel in the 5G/2G radio columns on device list.
Fix disabling Hotspot Terms of Service.
Fix for allowing to restart empty list of devices.
Fix map device RF button not working correctly.
Fix reordering firewalls rules.
Fix case when two clicks needed to close dropdown list.
Fix the guest portal and preview.
Security improvements.
Various backend improvements and bugfixes.
5.7.3
Controller bugfixes/changes since 5.7.1:
Add Incompatible Model Warning.
Enable Custom Antenna Gain if user is Professional Installer.
Improve SSH keys validation.
Add Manage profiles link to switch port forms.
Add different styles per log level for Controller Logs.
Add button to download controller logs.
Add button to fetch previous controller logs.
Show the Ports tab for In-Wall APs.
Add channel utilization to detailed overlay on Maps.
Update translations.
Fix applying custom antenna gain for US region.
Add horizontal rule in Debugging metrics for better separation of items.
Fix WLAN group queue changes pre-population.
Fix device name and icon missing in DPI Users view.
Fix Device Required badge blinking for short time after view is loaded.
Fix resetting speed test on site switch.
Fix setting VHT160 for devices which support it.
Fix incorrect client count in filter drop-down.
Fix disappearing upgrade button upon renaming.
Fix incorrect dark styles for Firmware Manager.
Fix for selecting the same map in map switcher.
Update WebRTC JNI to v1.0.27.
Various backend bugfixes and improvements.
5.7.1
Controller bugfixes/changes since 5.7.0:
Show pending adoption devices based event.
Add "Require MS-CHAP v2" control for L2TP Remote User VPN.
Add egress rate limiting in Switch Profiles.
Improve error handling when device is busy on airTime.
Hide incorrect band options for RF scan.
Pre-cache the app in browser - should speedup loading that app [Beta].
Fix displaying SSH keys on the bright settings page.
Fix for slow dpi restriction list display.
Fix currently selected element in airTime when filters change.
Fix showing channels in system config view.
Fix disappearing WLANs section in property panel after config change.
Fix for missing uplink section in known clients.
Fix UI glitches in Chrome.
Fix overlapping information in Channel Utilization.
Fix displaying virtual device on site change.
Fix displaying clients in device list.
Fix name of device in Firmware Manager list.
Remove non-existing USG8 from Virtual Devices.
Remove port profiles for In-Wall AP.
Update translations.
Improve static route validation.
Upgrade Tomcat to 7.0.82.
Database migration improvements and fixes.
Database management improvements for UCK.
Security fixes.
Various backend bugfixes and improvements.
5.7.0
New Features
Add GeoIP Filtering options to settings [Beta].
Add Virtual devices on Maps to plan coverage.
Add SSH keys to authenticate to device.
Add Auto Channel feature on Maps.
Add Release Notes.
Add ability to create and set user defined DHCP options.
Add Wireless Uplink priority.
Controller bugfixes/changes since 5.6.18:
Add 'Disable CCK rates' checkbox for 2G Data Rate Control.
Add continue shopping button to cart.
Add client device type detection.
Add duplicate WLANs functionality to WLAN Group.
Add checkbox to enable LLDP on all interfaces in Gateway Advanced property panel.
List incompatibile devices in Device Firmware Upgrade Notification.
Store selected DPI categories per site.
Improve date range picker.
Improve list of Unplaced Devices on Maps.
Improve validation for adding the same MAC address in MAC filter.
Improve DPI restrictions.
Fix device channel in channel utilization.
Fix scrollbar on firewall group modal.
Fix colours of DPI categories widgets.
Fix Cancel Migration section in Property Panel for switches.
Translate DPI categories.
Add Russian translations.
Various backend improvements and bugfixes.