products:unifi:unifi_ap_ac_lr


Models made before September 2016 (datecode 1638) lack 802.3af PoE, this is only indicated with a sticker on the packaging! Models before this require 24v PoE via injector or 24v Ubiquiti switch port.

Series Type: UniFi
Website Link: AP AC LR
Model: UAP‑AC‑LR
Type: 802.11ac Long Range Access Point

Description: The UniFi AC LR AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for long-range deployment of high‑performance wireless networks.

UAP‑AC‑LR
Dimensions 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70")
Weight 240 g (8.5 oz)
With Mounting Kits 315 g (11.1 oz)
Networking Interface (1) 10/100/1000 Ethernet Port
Buttons Reset
Power Method - Option 1 802.3af/A PoE
Power Method - Option 2 24V Passive PoE (Pairs 4, 5+; 7, 8 Return)
Power Supply 24V, 0.5A Gigabit PoE Adapter (* Only the single-pack of the UAP-AC-LR includes a PoE adapter.)
Power Save Supported
Maximum Power Consumption 6.5W
Maximum TX Power
2.4 GHz 24 dBm
5 GHz 22 dBm
Antennas (1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz: 3 dBi, 5 GHz: 3 dBi
Wi-Fi Standards 802.11 a/b/g/n/ac
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID Up to 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC


Hardware
Instruction set MIPS
Vendor Qualcomm / Atheros
Bootloader UBoot
System-On-Chip QCA9563-AL3A
CPU Frq 775 MHz
BogoMIPS 385.84
Flash-Chip Macronix MX25L12835FMI
Flash size 16 MiB
RAM-Chip Winbond W971GG6KB-25
RAM size 128 MiB
Wireless 1 (2.4 GHz) QCA9563 built-in
Wireless 2 (5 GHz) custom QCA988X
Eth Phy ?
USB possibly unpopulated
Serial Yes, for U-Boot


Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 250+


Supported Data Rates (Mbps)
Standard Data Rates
802.11ac 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
  1. Blue Ring - Solid
    1. Normal Operation
  2. White Ring - Flashing
    1. Unconfigured state
  1. No light/power
    1. Check ethernet connection.
    2. Are you connected to a PoE enabled switch or PoE injector?
    3. Does the switch/injector have power?
  2. Can only connect to the primary/default VLAN
    1. Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled')
  • How do I perform a factory reset?
    • Hold the reset button for 5-10sec.
    • This will reset the AP and require a controller to re-adopt the unit. This is not recomended for general troubleshooting!
  • How many networks can I run off of this one AP?
    • Up to 8 per Radio
  • Does this AP come with a PoE injector for use on a non-PoE enabled switch?
    • Yes!
      • NOTE: The 5pack version of this AP does NOT come with PoE injector, it is recommended to use them with a PoE enabled switch like the UniFi Switch 8-150W or better.


Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 20480 bytes) in /home/nevyxvrt/ubntwiki.com/lib/plugins/authplain/auth.php on line 446

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 20480 bytes) in /home/nevyxvrt/ubntwiki.com/inc/ErrorHandler.php on line 102