This is an old revision of the document!
5.7 UniFi Controller Consolidated Change Log
5.7.27
Controller bugfixes/changes since 5.7.26:
- Rename duplicated translation key for connectivity monitor.
- Fix a bug that could prevent admins from being able to switch sites.
- Improve accuracy of reported wireless uplink candidates.
- Various backend bugfixes and improvements.
5.7.26
Controller bugfixes/changes since 5.7.25:
- Fix empty Radio Type dropdown on Performance page.
- Fix client signal binding.
- Fix downloading autobackup via unifi.ubnt.com.
- Fix available wireless uplinks so disabled radios/APs are not displayed.
- Fix a bug with L3 wireless adoption.
- Hide Elite ToS accept button for not supported countries in property panel.
- Temporarily limit MongoDB support to releases prior to 3.6.x (currently 3.4.14 is recommended).
- Various backend bugfixes and improvements.
5.7.25
New Features:
- Add app switcher.
- Allow users to opt-out wireless uplinking/meshing on per-radio basis.
Controller bugfixes/changes since 5.7.23:
- Add tooltip/help to Connectivity Monitor.
- Improving autobackup handling for UCK with limited storage.
- Update outdoor mode checkbox label.
- Update timezones to match tzdata.
- Add bypass for confirm before device downgrade.
- Fix IPv6 PD Prefix ID validation and config generation.
- Hide per radio vwire control when connectivity setting is disabled.
- Fix incorrect client signal value in ap's property panel and clients list.
- Fix incorrect internet traffic count for wireless clients.
- Hide configuration section in Elite Device settings when Cloud Access is off.
- Hide Elite ToS accept button for not supported countries.
- Mask password characters for RADIUS hotspot.
- Various backend bugfixes and improvements.
5.7.23
Controller bugfixes/changes since 5.7.22:
- Adding USG alias validation.
- Fix broken batch config for radios.
- Fix for clients counters in property panel.
- Fix cut RF Scan tooltip.
- Fix IPv6 RA attributes.
- Fix RADIUS auth and accounting on guest networks when using USG.
- Improve reliability of topology.
- Various backend bugfixes and improvements.
5.7.22
Controller bugfixes/changes since 5.7.21:
- Prevent port forwards from interfering with IPsec and vice versa.
- Fix an issue causing the controller to be factory reset.
- Improve configured wireless uplink notifications.
- Various backend bugfixes and improvements.
5.7.21
Controller bugfixes/changes since 5.7.20:
- Mark allow meshing option as beta feature.
- Adding opening property panel directly with alerts tab for devices with warnings.
- Adding RADIUS VLANs - tooltip.
- Fix filtering virtual devices on maps.
- Fix empty UI after clicking Escape on Missing SD card dialog.
- Fix broken RA configuration on VLANs.
- Fixing enabling cloud access from site admins.
- Hide message when controller minor version has not changed.
- Improve wireless adoption process.
- Conditionally enable journalling on UCK after successful migration.
- Various backend bugfixes and improvements.
5.7.20
Controller bugfixes/changes since 5.7.19:
- Improve Neighboring Access Points loading.
- Update Wireless Uplink information text.
- User Groups - setting limits more flexible.
- Fixing WebSocket error for site admin without Show pending devices permission.
- Fixing incorrect debug terminal connection state after closing panel.
- Removed second performance word from real-time tooltip.
- Fix invisible debug terminal when device is RF scanning.
- Fix set switch port profile native network as 'None'.
- Reduce port stats log level to fix unnecessary log spam.
- PPPoE IPv6 provisioning improvements.
- Improve guest portal handling on gateway devices.
- Fix validation of IPv6 IPs as group members.
- Various backend bugfixes and improvements.
5.7.19
Controller bugfixes/changes since 5.7.18:
- Fix downgrade button title.
- Fix password field validation in edit account form.
- Find the correct uplink on devices with native bonding.
- Various backend bugfixes and improvements.
5.7.18
Controller bugfixes/changes since 5.7.15:
- Display security warning when superadmin uses the same password for SSH devices authorization.
- Enable Show Pending Devices permission when Advanced Features for site are enabled.
- Hide Switch temperature if sensor is not present.
- Show RF Scan only for devices with proper Wi-Fi capabilities.
- Remove non AP devices from virtual devices list.
- Display downgrade button if lower version is detected.
- Don't disable "Sign In" button on login page.
- Clarify IPS alert wording.
- Disable hardware offload on USG when Smart Queue QoS is enabled.
- Fix default 5G channel width.
- Fix Topology console error.
- Fix Debugging Metrics.
- Fix load page error in IE11.
- Fix missing alerts tab.
- Fix site changing over WebRTC for latest Firefox.
- Fix for missing filters in clients tab.
- Fix WebRTC establish connection retry mechanism.
- Fix display interface stats for USG-XG.
- Fix factory reset issue on UCK.
- Fix pre-adoption upgrade of USG devices.
- Fix VPN status reporting.
- Lower RSSI requirements for wireless adoption.
- Remove reboot before upgrade logic from UAP upgrades.
- Various backend bugfixes and improvements.
5.7.15
Controller bugfixes/changes since 5.7.12:
- Add a validation message to the missing redirect using hostname once any social authentication method is enabled.
- Allow upper case letter in email.
- Moved device warnings to new tab in property panel.
- Added warnings count in device status badge.
- Merged Users and Guests tabs in property panel.
- Maps: show error when saving coordinates of device on map failed.
- Statistics - disallow future date in date range picker.
- Allow displaying negative temperatures for switches.
- Fixing not opening DPI clients.
- Mark Google transactions as social in Hotspot Manager.
- Fix disappearing devices on site change.
- Fix selected tab in property panel when current active tab is missing.
- Fix downloading large backups over WebRTC.
- Fix closing property panel when changing site.
- Fix connection fail after changing granularity on Statistics page with WebRtc and refreshing the page.
- AC InWall not showing any data in Switch Statistics view.
- Fixing filtering virtual devices on map.
- Fix case when incorrect port table contents cause Topology not to render.
- Fix a bug preventing email password recovery from functioning in some cases.
- Various hardware provisioning improvements.
- Various backend bugfixes and improvements.
5.7.12
Controller bugfixes/changes since 5.7.11:
- In order for an AP to be capable of becoming a Mesh AP, the setting must be set in device config.
- Maps: show error when saving coordinates of device on map failed.
- Fix ETC menu on Hotspot Manager Page.
- Fix In Hotspot manager part of tooltip is displayed outside the graph.
- Incorrect client signal value in property panel, section Statistics.
- Added missing event handling for Pending Adoption Wireless discovery.
- Improvements for RADIUS profile migration at time of controller upgrade.
- Various backend bugfixes and improvements.
5.7.11
Controller bugfixes/changes since 5.7.10:
- Add message with instruction to csv upload.
- Add model EOL (end of life) pending warning.
- Additional charts for Devices (Statistics → Performance view).
- Drag and drop optimizations.
- Expand firewall group name limit to 64.
- Hide the Aggregation option under Network when UAP supports it natively.
- Improve way how Donut charts display tooltips, to prevent being overlapped by other elements.
- IPv6 - Add DHCPv6 DNS Control.
- Lock web store to US only.
- Fix displaying selected priority wireless uplink.
- Fix displaying blank page on double click on Insights.
- Fix filtering outdoor channels by using default value for outdoor mode.
- Fix handling error responses received via WebRTC channel.
- Fix missing action buttons after enabling cloud access.
- Fix saving RADIUS profile without accounting servers.
- Fix radios sorting in Configure Radios section.
- GeoIP Filtering - Block incoming/outgoing/both traffic.
- Temporarily remove WAN/WAN2 IPv6 PPPoE option.
- Rename label Select group to Any in firewall's form.
- SNMPv3 - Username and Password validation to match SNMPv3 standard and USG requirements.
- Show Hardware Offload as off when IPS is enabled, don't allow it to be turned on.
- Map fixes: Devices disappearing from map when changing from legacy to designer without saving and cannot change map type from Google to image at the second time.
- Several device management improvements, to improve UX and mitigate some errors.
- Various backend bugfixes and improvements.
5.7.10
New Features:
- Support Antenna selection for internal antenna.
Controller bugfixes/changes since 5.7.9:
- Add message with instruction to csv upload.
- Expand firewall group name limit to 64.
- Improve way how Donut charts display tooltips, to prevent being overlapped by other elements.
- IPv6 - Add DHCPv6 DNS Control.
- Additional charts for Devices (Statistics → Performance view).
- Fix: client history rate has wrong units.
- Fix: client history signal chart goes off the scale.
- Fix enabling https redirection when switching between authentication methods.
- Fix issue where USW management VLAN would reset to defaults on controller upgrade.
- Hide IPv6 address at network's list when network type is not 'static'.
- SVG Maps - Clicking on RF button next to the device doesn't open RF tab from device.
- Improve alerts from IDS/IPS.
- update nanoHD name.
- Add workaround for Cloud Key firmware upgrade issue, for devices on firmware 0.8.1 to 0.8.4.
- Apply the same rules for both TCP and UDP DNS.
- Various backend bugfixes and improvements.
5.7.9
New Features
- Add Intrusion Prevention System (IPS) [beta].
Controller bugfixes/changes since 5.7.8:
- Display WLANs in System Config with Multicast and Broadcast blocking enabled.
- Display Default Expiration Time field for Hotspot and Facebook WiFi.
- Disable HTTPS redirection for Facebook, Facebook WiFi and Google.
- Do not remember Client Statistics page as last opened page.
- Fix cloud access GUI pages for multiple super admins.
- Fix Auto Channel dialog which hides map device labels.
- Fix Device location opens map with wrong coordinates.
- Fix Missing Traffic Stats data on first load.
- Fix Invisible coverage in maps after opening property panel and then moving AP.
- Fix resolving devices on Neighboring Access Points page.
- Fix too much space for BSSID tooltip in device list.
- Fix: Unable to place devices on designer map.
- Fix USG does not have Last Seen field.
- Fix DHCP relay configuration.
- Improved UI of Cloud Access Settings page.
- Add AP name to radar detected event.
- Allow DPI to be enabled when offload is disabled (if the firmware supports it).
5.7.8
New Features
- Link to property panel from Location on Neighboring Access Points page.
Controller bugfixes/changes since 5.7.7:
- Add a tooltip to OpenVPN shared key UI.
- Add API error messages.
- Add progress info about loading Map.
- Display tooltip in case of attempt to adopt multiple gateways to one site.
- Additional DPI application icons (i.e. Slack).
- Improve performance of Neighboring Access Points page.
- Update translations.
- Add elite device events to notifications settings.
- Fix console error when no map is defined.
- Fix Date range selector in narrow web browser window.
- Fix missing DPI users (name & icon).
- Fix missing location alias Neighboring Access Points page.
- Fix upload of map image during remote access.
- IPv6 - save dhcpv6_pd_size as string.
- Enable dead peer detection (DPD) on auto-S2S VPN.
- Exclude WAN subnets from policy routing, which fixes issues like THIS.
- Add NAT of other WAN IPs out of WANs, fixing several issues related to multi-WAN.
5.7.7
New Features
- Add IPv6 support (Beta).
- Add restart devices permission.
- Add support for new Elite Device service.
- Add Bulgarian translations to the Hotspot Portal.
Controller bugfixes/changes since 5.7.4:
- Add overflow menu icon in top right corner.
- Add customize columns to switch properties port list.
- Add WebGL support detection on Maps.
- Allow to open debug terminal and airtime/airview in the same time.
- Allow to use URL for DHCP TFTP Server in Network configuration.
- Include AC InWall in Statistics/Switch view.
- Remember last visited Insights, Stats and Maps page.
- Topology view: show bonding enabled on AP-HD.
- Fix case when Calendar dropdown is cut off on small screens.
- Fix client name not showing correctly in DPI Application Usage widget.
- Fix collapsible cells in device table.
- Fix disabling Hotspot Welcome Text.
- Fix empty tabs in property panel after adopting device in Managed by Other state.
- Fix for Topology view - AP channels are hidden after collapsing and restoring parent node.
- Fix positioning line chart's tooltip on narrow screens, when the chart is too close to the top of container.
- Fix remembering rows per page on Insights pages.
- Fix selecting default Echo Server in the USG Advanced Settings.
- Fix USG memory usage and average load is not displayed in devices list.
- Fix Wi-Fi icon on OS X High Sierra (Chrome & Firefox).
- Fix WLAN VLAN range.
- Fix no DPI data for some time in users tab in traffic stats.
- Setting RF Scanning state just after scan is started.
- Improve default allocation logic to make it more suitable for memory constrained systems (see our notice HERE).
- Various backend improvements and bugfixes.
5.7.4
New Features
- Batch remove vouchers.
- Customize voucher columns.
- Ability to display historical statistics per Client (traffic, packets, signal power etc.).
- Add support for SNMPv3.
Controller bugfixes/changes since 5.7.3:
- Add "Reset columns" dropdown to client list column selector.
- Add uplink to device list.
- Confirm before setting PoE mode to 24v passive or passthrough.
- Make TX/RX labels consistent.
- Always show at least the primary channel in the 5G/2G radio columns on device list.
- Fix disabling Hotspot Terms of Service.
- Fix for allowing to restart empty list of devices.
- Fix map device RF button not working correctly.
- Fix reordering firewalls rules.
- Fix case when two clicks needed to close dropdown list.
- Fix the guest portal and preview.
- Security improvements.
- Various backend improvements and bugfixes.
5.7.3
Controller bugfixes/changes since 5.7.1:
- Add Incompatible Model Warning.
- Enable Custom Antenna Gain if user is Professional Installer.
- Improve SSH keys validation.
- Add Manage profiles link to switch port forms.
- Add different styles per log level for Controller Logs.
- Add button to download controller logs.
- Add button to fetch previous controller logs.
- Show the Ports tab for In-Wall APs.
- Add channel utilization to detailed overlay on Maps.
- Update translations.
- Fix applying custom antenna gain for US region.
- Add horizontal rule in Debugging metrics for better separation of items.
- Fix WLAN group queue changes pre-population.
- Fix device name and icon missing in DPI Users view.
- Fix Device Required badge blinking for short time after view is loaded.
- Fix resetting speed test on site switch.
- Fix setting VHT160 for devices which support it.
- Fix incorrect client count in filter drop-down.
- Fix disappearing upgrade button upon renaming.
- Fix incorrect dark styles for Firmware Manager.
- Fix for selecting the same map in map switcher.
- Update WebRTC JNI to v1.0.27.
- Various backend bugfixes and improvements.
5.7.1
Controller bugfixes/changes since 5.7.0:
- Show pending adoption devices based event.
- Add "Require MS-CHAP v2" control for L2TP Remote User VPN.
- Add egress rate limiting in Switch Profiles.
- Improve error handling when device is busy on airTime.
- Hide incorrect band options for RF scan.
- Pre-cache the app in browser - should speedup loading that app [Beta].
- Fix displaying SSH keys on the bright settings page.
- Fix for slow dpi restriction list display.
- Fix currently selected element in airTime when filters change.
- Fix showing channels in system config view.
- Fix disappearing WLANs section in property panel after config change.
- Fix for missing uplink section in known clients.
- Fix UI glitches in Chrome.
- Fix overlapping information in Channel Utilization.
- Fix displaying virtual device on site change.
- Fix displaying clients in device list.
- Fix name of device in Firmware Manager list.
- Remove non-existing USG8 from Virtual Devices.
- Remove port profiles for In-Wall AP.
- Update translations.
- Improve static route validation.
- Upgrade Tomcat to 7.0.82.
- Database migration improvements and fixes.
- Database management improvements for UCK.
- Security fixes.
- Various backend bugfixes and improvements.
5.7.0
New Features
- Add GeoIP Filtering options to settings [Beta].
- Add Virtual devices on Maps to plan coverage.
- Add SSH keys to authenticate to device.
- Add Auto Channel feature on Maps.
- Add Release Notes.
- Add ability to create and set user defined DHCP options.
- Add Wireless Uplink priority.
Controller bugfixes/changes since 5.6.18:
- Add 'Disable CCK rates' checkbox for 2G Data Rate Control.
- Add continue shopping button to cart.
- Add client device type detection.
- Add duplicate WLANs functionality to WLAN Group.
- Add checkbox to enable LLDP on all interfaces in Gateway Advanced property panel.
- List incompatibile devices in Device Firmware Upgrade Notification.
- Store selected DPI categories per site.
- Improve date range picker.
- Improve list of Unplaced Devices on Maps.
- Improve validation for adding the same MAC address in MAC filter.
- Improve DPI restrictions.
- Fix device channel in channel utilization.
- Fix scrollbar on firewall group modal.
- Fix colours of DPI categories widgets.
- Fix Cancel Migration section in Property Panel for switches.
- Translate DPI categories.
- Add Russian translations.
- Various backend improvements and bugfixes.