Models made before September 2016 (datecode 1638) lack 802.3af PoE, this is only indicated with a sticker on the packaging! Models before this require 24v PoE via injector or 24v Ubiquiti switch port.

Series Type: UniFi
Website Link: AP AC Lite
Model: UAP‑AC‑LITE
Type: 802.11ac Dual Radio Access Point

Description: The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high‑performance wireless networks.

UAP-AC-LITE
Dimensions 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24")
Weight 170 g (6.0 oz)
With Mounting Kits 185 g (6.5 oz)
Networking Interface (1) 10/100/1000 Ethernet Port
Buttons Reset
Power Method - Option 1 802.3af/A PoE
Power Method - Option 2 24V Passive PoE (Pairs 4, 5+; 7, 8 Return)
Power Supply 24V, 0.5A Gigabit PoE Adapter (* Only the single-pack of the UAP-AC-LITE includes a PoE adapter.)
Power Save Supported
Maximum Power Consumption 6.5W
Maximum TX Power
2.4 GHz 20 dBm
5 GHz 20 dBm
Antennas (2) Dual-Band Antennas, 3 dBi Each
Wi-Fi Standards 802.11 a/b/g/n/ac
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID Up to 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC


Hardware
Instruction set MIPS
Vendor Qualcomm / Atheros
Bootloader UBoot
System-On-Chip QCA9563-AL3A
CPU Frq 775 MHz
BogoMIPS 385.84
Flash-Chip Macronix MX25L12835FMI
Flash size 16 MiB
RAM-Chip Winbond W971GG6KB-25
RAM size 128 MiB
Wireless 1 (2.4 GHz) QCA9563 built-in
Wireless 2 (5 GHz) Ubiquiti U-AME-G1-BR4A (custom QCA988X)
Eth Phy Atheros AR8033-AL1A
USB possibly unpopulated
Serial Yes, for U-Boot


Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 250+


Supported Data Rates (Mbps)
Standard Data Rates
802.11ac 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
802.11n 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
  1. Blue Ring - Solid
    1. Normal Operation
  2. White Ring - Flashing
    1. Unconfigured state
  1. No light/power
    1. Check ethernet connection.
    2. Are you connected to a PoE enabled switch or PoE injector?
    3. Does the switch/injector have power?
  2. Can only connect to the primary/default VLAN
    1. Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled')
  • How do I perform a factory reset?
    • Hold the reset button for 5-10sec.
    • This will reset the AP and require a controller to re-adopt the unit. This is not recomended for general troubleshooting!
  • How many networks can I run off of this one AP?
    • Up to 8 per Radio
  • Does this AP come with a PoE injector for use on a non-PoE enabled switch?
    • Yes!

NOTE: The 5pack version of this AP does NOT come with PoE injector, it is recommended to use them with a PoE enabled switch like the UniFi Switch 8-150W or better.

  • products/unifi/unifi_ap_ac_lite.txt
  • Last modified: 2018/05/21 01:10
  • by kzboy