Series Type: UniFi
Website Link: AP AC Pro
Model: UAP‑AC‑PRO
Type: 802.11ac PRO Access Point

Description: The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

UAP‑AC‑PRO
Dimensions 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38")
Weight 350 g (12.4 oz)
With Mounting Kits 450 g (15.9 oz)
Networking Interface (1) 10/100/1000 Ethernet Port
Port (1) USB 2.0 Port
Buttons Reset
Power Method - Option 1 802.3af/802.3at Supported
Power Method - Option 2 Passive Power over Ethernet (48V), (Supported Voltage Range: 44 to 57VDC)
Power Supply 48V, 0.5A PoE Gigabit Adapter (* Only the single-pack of the UAP-AC-PRO includes a PoE adapter.)
Power Save Supported
Maximum Power Consumption 9W
Maximum TX Power
2.4 GHz 22 dBm
5 GHz 22 dBm
Antennas (3) Dual-Band Antennas, 2.4 GHz: 3 dBi, 5 GHz: 3 dBi
Wi-Fi Standards 802.11 a/b/g/n/ac
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID Up to 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC


Hardware
Instruction set MIPS
Vendor Qualcomm / Atheros
Bootloader UBoot
System-On-Chip QCA9563-AL3A
CPU Frq 775 MHz
BogoMIPS 385.84
Flash-Chip Macronix MX25L12835FMI
Flash size 16 MiB
RAM-Chip Winbond W971GG6KB-25
RAM size 128 MiB
Wireless 1 (2.4 GHz) QCA9563 built-in
Wireless 2 (5 GHz) QCA9880-BR4A
Eth Phy QCA8334-AL3C
USB USB 2.0
Serial Yes, for U-Boot


Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 250+


Supported Data Rates (Mbps)
Standard Data Rates
802.11ac 6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80)
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
  1. Blue Ring - Solid
    1. Normal Operation
  2. White Ring - Flashing
    1. Unconfigured state
  1. No light/power
    1. Check ethernet connection.
    2. Are you connected to a PoE enabled switch or PoE injector?
    3. Does the switch/injector have power?
  2. Can only connect to the primary/default VLAN
    1. Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled')
  • How do I perform a factory reset?
    • Hold the reset button for 5-10sec.
    • This will reset the AP and require a controller to re-adopt the unit. This is not recomended for general troubleshooting!
  • How many networks can I run off of this one AP?
    • Up to 8 per Radio
  • Does this AP come with a PoE injector for use on a non-PoE enabled switch?
    • Yes!
      • NOTE: The 5pack version of this AP does NOT come with PoE injector, it is recommended to use them with a PoE enabled switch like the UniFi Switch 8-150W or better.

  • products/unifi/unifi_ap_ac_pro.txt
  • Last modified: 2018/05/21 01:06
  • by kzboy