Series Type: UniFi
Website Link: AP HD
Model: UAP-AC-HD
Type: 802.11ac Wave 2 Enterprise Wi-Fi Access Point

Description: Deploy the UniFi HD AP in high-density environments requiring maximum wireless performance. The UniFi HD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3at PoE+ compatibility.

UAP‑AC‑HD
Dimensions 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89")
Weight 700 g (1.54 lb)
With Mounting Kits 830 g (1.83 lb)
Networking Interface (2) 10/100/1000 Ethernet Ports
Buttons Reset
Power Method 802.3at PoE+
Supported Voltage Range 44 to 57VDC
Power Supply UniFi Switch (PoE)
Power Save Supported
Maximum Power Consumption 17W
Maximum TX Power
2.4 GHz 6-25 dBm
5 GHz 6-25 dBm
Antennas (2) Dual-Port, Dual-Polarity Antennas, , 2.4 GHz: 3 dBi each, 5 GHz: 4 dBi each
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) 802.11w/PMF
BSSID Up to 8 per Radio
Mounting Wall/Ceiling (Kits Included)
Operating Temperature -10 to 70° C (14 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC


Advanced Traffic Management
VLAN 802.1Q
Advanced QoS Per-User Rate Limiting
Guest Traffic Isolation Supported
WMM Voice, Video, Best Effort, and Background
Concurrent Clients 1000+


Supported Data Rates (Mbps)
Standard Data Rates
802.11ac 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b 1, 2, 5.5, 11 Mbps
  1. Blue Ring - Solid
    1. Normal Operation
  2. White Ring - Flashing
    1. Unconfigured state
  1. No light/power
    1. Check ethernet connection.
    2. Are you connected to a PoE enabled switch or PoE injector?
    3. Does the switch/injector have power?
  2. Can only connect to the primary/default VLAN
    1. Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled')
  • How do I perform a factory reset?
    • Hold the reset button for 5-10sec.
    • This will reset the AP and require a controller to re-adopt the unit. This is not recomended for general troubleshooting!
  • How many networks can I run off of this one AP?
    • Up to 8 per Radio
  • Does this AP come with a PoE injector for use on a non-PoE enabled switch?
    • No, it is recommended to use them with a PoE enabled switch like the UniFi Switch 8-150W or better.
  • products/unifi/unifi_ap_hd.txt
  • Last modified: 2018/05/21 01:07
  • by kzboy