UniFi nanoHD
Series Type: UniFi
Website Link: NanoHD
Model: UAP-nanoHD
Type: 4x4 MU-MIMO 802.11ac Wave 2 Access Point
Description: Deploy the UniFi nanoHD AP in high-density
environments requiring maximum wireless performance
and minimal footprint. The UniFi nanoHD AP features
simultaneous, dual-band, 4x4 MU-MIMO technology and
convenient 802.3af PoE compatibility
Specifications
| UAP‑nanoHD | |
|---|---|
| Dimensions | 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29") |
| Weight | 300 g (10.6 oz) |
| With Mounting Kits | 315 g (11.1 oz) |
| Networking Interface | (1) 10/100/1000 Ethernet Port |
| Buttons | Reset |
| Power Method | 802.3af PoE |
| Power Supply | UniFi Switch (PoE) |
| Maximum Power Consumption | 10.5W |
| Supported Voltage Range | 44 to 57VDC |
| Maximum TX Power | |
| 2.4 GHz | 23 dBm |
| 5 GHz | 26 dBm |
| MIMO | |
| 2.4 GHz | 2x2 |
| 5 GHz | 4x4 |
| Radio Rates | |
| 2.4 GHz | 300 Mbps |
| 5 GHz | 1733 Mbps |
| Antennas | 2.4 GHz: 2.8 dBi each, 5 GHz: 3 dBi each |
| Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| BSSID | Up to 8 per Radio |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| Advanced Traffic Management | |
|---|---|
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest Traffic Isolation | Supported |
| WMM | Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
|---|---|
| Standard | Data Rates |
| 802.11ac | 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) |
| 802.11n | 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
LED Status Light Ring
- Blue Ring - Solid
- Normal Operation
- White Ring - Flashing
- Unconfigured state
Troubleshooting tips
- No light/power
- Check ethernet connection.
- Are you connected to a PoE enabled switch or PoE injector?
- Does the switch/injector have power?
- Can only connect to the primary/default VLAN
- Check that your switch port has all VLANs enabled (Try cycling the port through 'Disabled')
FAQ
- How do I perform a factory reset?
- Hold the reset button for 5-10sec.
- This will reset the AP and require a controller to re-adopt the unit. This is not recomended for general troubleshooting!
- How many networks can I run off of this one AP?
- Up to 8 per Radio
- Does this AP come with a PoE injector for use on a non-PoE enabled switch?
- No, it is recommended to use them with a PoE enabled switch like the UniFi Switch 8-60W or better.